Remove t.Fatal at end of single file test

Properly show symlinks in Mode

.gitignore

@@ -1 +1,2 @@
-testing
+testing
+/go-unsquashfs

README.md

@@ -1,20 +1,41 @@
-# squashfs (WIP)
+# squashfs
 
 [![PkgGoDev](https://pkg.go.dev/badge/github.com/CalebQ42/squashfs)](https://pkg.go.dev/github.com/CalebQ42/squashfs) [![Go Report Card](https://goreportcard.com/badge/github.com/CalebQ42/squashfs)](https://goreportcard.com/report/github.com/CalebQ42/squashfs)
 
-A PURE Go library to read and write squashfs.
+A PURE Go library to read squashfs. There is currently no plans to add archive creation support as it will almost always be better to just call `mksquashfs`. I could see some possible use cases, but probably won't spend time on it unless it's requested (open a discussion if you want this feature).
+
+The library has two parts with this `github.com/CalebQ42/squashfs` being easy to use as it implements `io/fs` interfaces and doesn't expose unnecessary information. 95% this is the library you want. If you need lower level access to the information, use `github.com/CalebQ42/squashfs/low` where far more information is exposed.
 
 Currently has support for reading squashfs files and extracting files and folders.
 
 Special thanks to <https://dr-emann.github.io/squashfs/> for some VERY important information in an easy to understand format.
 Thanks also to [distri's squashfs library](https://github.com/distr1/distri/tree/master/internal/squashfs) as I referenced it to figure some things out (and double check others).
 
-## [TODO](https://github.com/CalebQ42/squashfs/projects/1?fullscreen=true)
+## FUSE
+
+As of `v1.0`, FUSE capabilities has been moved to [a separate library](https://github.com/CalebQ42/squashfuse).
 
 ## Limitations
 
-* No Xattr parsing. This is simply because I haven't done any research on it and how to apply these in a pure go way.
+* No Xattr parsing.
+* Socket files are not extracted.
+  * From my research, it seems like a socket file would be useless if it could be created.
+* Fifo files are ignored on `darwin`
 
-## Performance
+## Issues
 
-Testing on a zstd compressed file, my library is anywhere from 5x ~ 7x slower then `unsquashfs`
+* Significantly slower then `unsquashfs` when nested images
+  * This seems to be related to above along with the general optimization of `unsquashfs` and it's compression libraries.
+    * Not to mention it's written in C
+  * Times seem to be largely dependent on file tree size and compression type.
+    * My main testing image (~100MB) using Zstd takes about 5x longer.
+    * An Arch Linux airootfs image (~780MB) using XZ compression with LZMA filters takes about 30x longer.
+    * A Tensorflow docker image (~3.3GB) using Zstd takes about 12x longer.
+
+Note: These numbers are using `FastOptions()`. `DefaultOptions()` takes about 2x longer.
+
+## Recommendations on Usage
+
+Due to the above performance consideration, this library should only be used to access files within the archive without extraction, or to mount it via Fuse.
+
+* Neither of these use cases are largely effected by the issue above.

cmd/go-unsquashfs/main.go

@@ -0,0 +1,37 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+	"os"
+	"time"
+
+	"github.com/CalebQ42/squashfs"
+)
+
+func main() {
+	verbose := flag.Bool("v", false, "Verbose")
+	ignore := flag.Bool("ip", false, "Ignore Permissions and extract all files/folders with 0755")
+	flag.Parse()
+	if len(flag.Args()) < 2 {
+		fmt.Println("Please provide a file name and extraction path")
+		os.Exit(0)
+	}
+	f, err := os.Open(flag.Arg(0))
+	if err != nil {
+		panic(err)
+	}
+	r, err := squashfs.NewReader(f)
+	if err != nil {
+		panic(err)
+	}
+	op := squashfs.DefaultOptions()
+	op.Verbose = *verbose
+	op.IgnorePerm = *ignore
+	n := time.Now()
+	err = r.ExtractWithOptions(flag.Arg(1), op)
+	if err != nil {
+		panic(err)
+	}
+	fmt.Println("Took:", time.Since(n))
+}

extraction_options.go

@@ -0,0 +1,49 @@
+package squashfs
+
+import (
+	"io"
+	"io/fs"
+	"runtime"
+
+	"github.com/CalebQ42/squashfs/internal/routinemanager"
+)
+
+type ExtractionOptions struct {
+	manager            *routinemanager.Manager
+	LogOutput          io.Writer   //Where the verbose log should write.
+	DereferenceSymlink bool        //Replace symlinks with the target file.
+	UnbreakSymlink     bool        //Try to make sure symlinks remain unbroken when extracted, without changing the symlink.
+	Verbose            bool        //Prints extra info to log on an error.
+	IgnorePerm         bool        //Ignore file's permissions and instead use Perm.
+	Perm               fs.FileMode //Permission to use when IgnorePerm. Defaults to 0777.
+	SimultaneousFiles  uint16      //Number of files to process in parallel. Default set based on runtime.NumCPU().
+	ExtractionRoutines uint16      //Number of goroutines to use for each file's extraction. Only applies to regular files. Default set based on runtime.NumCPU().
+}
+
+// The default extraction options.
+func DefaultOptions() *ExtractionOptions {
+	cores := uint16(runtime.NumCPU() / 2)
+	var files, routines uint16
+	if cores <= 4 {
+		files = 1
+		routines = cores
+	} else {
+		files = cores - 4
+		routines = 4
+	}
+	return &ExtractionOptions{
+		Perm:               0777,
+		SimultaneousFiles:  files,
+		ExtractionRoutines: routines,
+	}
+}
+
+// Less limited default options. Can run up 2x faster than DefaultOptions.
+// Tends to use all available CPU resources.
+func FastOptions() *ExtractionOptions {
+	return &ExtractionOptions{
+		Perm:               0777,
+		SimultaneousFiles:  uint16(runtime.NumCPU()),
+		ExtractionRoutines: uint16(runtime.NumCPU()),
+	}
+}

file.go

@@ -0,0 +1,430 @@
+package squashfs
+
+import (
+	"errors"
+	"io"
+	"io/fs"
+	"log"
+	"os"
+	"os/exec"
+	"path/filepath"
+	"runtime"
+	"strconv"
+
+	"github.com/CalebQ42/squashfs/internal/routinemanager"
+	squashfslow "github.com/CalebQ42/squashfs/low"
+	"github.com/CalebQ42/squashfs/low/data"
+	"github.com/CalebQ42/squashfs/low/inode"
+)
+
+// File represents a file inside a squashfs archive.
+type File struct {
+	full     *data.FullReader
+	rdr      *data.Reader
+	parent   *FS
+	r        *Reader
+	b        squashfslow.FileBase
+	dirsRead int
+}
+
+// Creates a new *File from the given *squashfs.Base
+func (r *Reader) FileFromBase(b squashfslow.FileBase, parent *FS) *File {
+	return &File{
+		b:      b,
+		parent: parent,
+		r:      r,
+	}
+}
+
+func (f *File) FS() (*FS, error) {
+	if !f.IsDir() {
+		return nil, errors.New("not a directory")
+	}
+	d, err := f.b.ToDir(&f.r.Low)
+	if err != nil {
+		return nil, err
+	}
+	return &FS{d: d, parent: f.parent, r: f.r}, nil
+}
+
+// Closes the underlying readers.
+// Further calls to Read and WriteTo will re-create the readers.
+// Never returns an error.
+func (f *File) Close() error {
+	if f.rdr != nil {
+		return f.rdr.Close()
+	}
+	f.rdr = nil
+	f.full = nil
+	return nil
+}
+
+// Returns the file the symlink points to.
+// If the file isn't a symlink, or points to a file outside the archive, returns nil.
+func (f *File) GetSymlinkFile() fs.File {
+	if !f.IsSymlink() {
+		return nil
+	}
+	if filepath.IsAbs(f.SymlinkPath()) {
+		return nil
+	}
+	fil, err := f.parent.Open(f.SymlinkPath())
+	if err != nil {
+		return nil
+	}
+	return fil
+}
+
+// Returns whether the file is a directory.
+func (f *File) IsDir() bool {
+	return f.b.IsDir()
+}
+
+// Returns whether the file is a regular file.
+func (f *File) IsRegular() bool {
+	return f.b.IsRegular()
+}
+
+// Returns whether the file is a symlink.
+func (f *File) IsSymlink() bool {
+	return f.b.Inode.Type == inode.Sym || f.b.Inode.Type == inode.ESym
+}
+
+func (f *File) Mode() fs.FileMode {
+	return f.b.Inode.Mode()
+}
+
+// Read reads the data from the file. Only works if file is a normal file.
+func (f *File) Read(b []byte) (int, error) {
+	if !f.IsRegular() {
+		return 0, errors.New("file is not a regular file")
+	}
+	if f.rdr == nil {
+		err := f.initializeReaders()
+		if err != nil {
+			return 0, err
+		}
+	}
+	return f.rdr.Read(b)
+}
+
+// ReadDir returns n fs.DirEntry's that's contained in the File (if it's a directory).
+// If n <= 0 all fs.DirEntry's are returned.
+func (f *File) ReadDir(n int) ([]fs.DirEntry, error) {
+	if !f.IsDir() {
+		return nil, errors.New("file is not a directory")
+	}
+	d, err := f.b.ToDir(&f.r.Low)
+	if err != nil {
+		return nil, err
+	}
+	start, end := 0, len(d.Entries)
+	if n > 0 {
+		start, end = f.dirsRead, f.dirsRead+n
+		if end > len(d.Entries) {
+			end = len(d.Entries)
+			err = io.EOF
+		}
+	}
+	var out []fs.DirEntry
+	var fi fileInfo
+	for _, e := range d.Entries[start:end] {
+		fi, err = f.r.newFileInfo(e)
+		if err != nil {
+			f.dirsRead += len(out)
+			return out, err
+		}
+		out = append(out, fs.FileInfoToDirEntry(fi))
+	}
+	f.dirsRead += len(out)
+	return out, err
+}
+
+// Returns the file's fs.FileInfo
+func (f *File) Stat() (fs.FileInfo, error) {
+	return newFileInfo(f.b.Name, &f.b.Inode), nil
+}
+
+// SymlinkPath returns the symlink's target path. Is the File isn't a symlink, returns an empty string.
+func (f *File) SymlinkPath() string {
+	switch f.b.Inode.Type {
+	case inode.Sym:
+		return string(f.b.Inode.Data.(inode.Symlink).Target)
+	case inode.ESym:
+		return string(f.b.Inode.Data.(inode.ESymlink).Target)
+	}
+	return ""
+}
+
+// Writes all data from the file to the given writer in a multi-threaded manner.
+// The underlying reader is separate
+func (f *File) WriteTo(w io.Writer) (int64, error) {
+	if !f.IsRegular() {
+		return 0, errors.New("file is not a regular file")
+	}
+	if f.full == nil {
+		err := f.initializeReaders()
+		if err != nil {
+			return 0, err
+		}
+	}
+	return f.full.WriteTo(w)
+}
+
+func (f *File) initializeReaders() error {
+	var err error
+	f.rdr, f.full, err = f.b.GetRegFileReaders(&f.r.Low)
+	return err
+}
+
+func (f *File) deviceDevices() (maj uint32, min uint32) {
+	var dev uint32
+	switch f.b.Inode.Type {
+	case inode.Char, inode.Block:
+		dev = f.b.Inode.Data.(inode.Device).Dev
+	case inode.EChar, inode.EBlock:
+		dev = f.b.Inode.Data.(inode.EDevice).Dev
+	}
+	return dev >> 8, dev & 0x000FF
+}
+
+func (f *File) path() string {
+	if f.parent == nil {
+		return f.b.Name
+	}
+	return filepath.Join(f.parent.path(), f.b.Name)
+}
+
+// Extract the file to the given folder. If the file is a folder, the folder's contents will be extracted to the folder.
+// Uses default extraction options.
+func (f *File) Extract(folder string) error {
+	return f.ExtractWithOptions(folder, DefaultOptions())
+}
+
+// Extract the file to the given folder. If the file is a folder, the folder's contents will be extracted to the folder.
+// Allows setting various extraction options via ExtractionOptions.
+func (f *File) ExtractWithOptions(path string, op *ExtractionOptions) error {
+	if op.manager == nil {
+		op.manager = routinemanager.NewManager(op.SimultaneousFiles)
+		if op.LogOutput != nil {
+			log.SetOutput(op.LogOutput)
+		}
+		err := os.MkdirAll(path, 0777)
+		if err != nil {
+			if op.Verbose {
+				log.Println("Failed to create initial directory", path)
+			}
+			return err
+		}
+	}
+	switch f.b.Inode.Type {
+	case inode.Dir, inode.EDir:
+		d, err := f.b.ToDir(&f.r.Low)
+		if err != nil {
+			if op.Verbose {
+				log.Println("Failed to create squashfs.Directory for", path)
+			}
+			return errors.Join(errors.New("failed to create squashfs.Directory: "+path), err)
+		}
+		errChan := make(chan error, len(d.Entries))
+		for i := range d.Entries {
+			b, err := f.r.Low.BaseFromEntry(d.Entries[i])
+			if err != nil {
+				if op.Verbose {
+					log.Println("Failed to get squashfs.Base from entry for", path)
+				}
+				return errors.Join(errors.New("failed to get base from entry: "+path), err)
+			}
+			go func(b squashfslow.FileBase, path string) {
+				i := op.manager.Lock()
+				if b.IsDir() {
+					extDir := filepath.Join(path, b.Name)
+					err = os.Mkdir(extDir, 0777)
+					op.manager.Unlock(i)
+					if err != nil {
+						if op.Verbose {
+							log.Println("Failed to create directory", path)
+						}
+						errChan <- errors.Join(errors.New("failed to create directory: "+path), err)
+						return
+					}
+					err = f.r.FileFromBase(b, f.r.FSFromDirectory(d, f.parent)).ExtractWithOptions(extDir, op)
+					if err != nil {
+						if op.Verbose {
+							log.Println("Failed to extract directory", path)
+						}
+						errChan <- errors.Join(errors.New("failed to extract directory: "+path), err)
+						return
+					}
+					errChan <- nil
+				} else {
+					fil := f.r.FileFromBase(b, f.r.FSFromDirectory(d, f.parent))
+					err = fil.ExtractWithOptions(path, op)
+					op.manager.Unlock(i)
+					fil.Close()
+					errChan <- err
+				}
+			}(b, path)
+		}
+		var errCache []error
+		for range d.Entries {
+			err := <-errChan
+			if err != nil {
+				errCache = append(errCache, err)
+			}
+		}
+		if len(errCache) > 0 {
+			return errors.Join(errors.New("failed to extract folder: "+path), errors.Join(errCache...))
+		}
+	case inode.Fil, inode.EFil:
+		path = filepath.Join(path, f.b.Name)
+		outFil, err := os.Create(path)
+		if err != nil {
+			if op.Verbose {
+				log.Println("Failed to create file", path)
+			}
+			return errors.Join(errors.New("failed to create file: "+path), err)
+		}
+		defer outFil.Close()
+		full, err := f.b.GetFullReader(&f.r.Low)
+		if err != nil {
+			if op.Verbose {
+				log.Println("Failed to create full reader for", path)
+			}
+			return errors.Join(errors.New("failed to create full reader: "+path), err)
+		}
+		full.SetGoroutineLimit(op.ExtractionRoutines)
+		_, err = full.WriteTo(outFil)
+		if err != nil {
+			if op.Verbose {
+				log.Println("Failed to write file", path)
+			}
+			return errors.Join(errors.New("failed to write file: "+path), err)
+		}
+	case inode.Sym, inode.ESym:
+		symPath := f.SymlinkPath()
+		if op.DereferenceSymlink {
+			filTmp := f.GetSymlinkFile()
+			if filTmp == nil {
+				if op.Verbose {
+					log.Println("Failed to get symlink's file:", f.path())
+				}
+				return errors.New("failed to get symlink's file")
+			}
+			fil := filTmp.(*File)
+			fil.b.Name = f.b.Name
+			err := fil.ExtractWithOptions(path, op)
+			if err != nil {
+				if op.Verbose {
+					log.Println("Failed to extract symlink's file:", filepath.Join(path, f.b.Name))
+				}
+				return errors.Join(errors.New("failed to extract symlink's file: "+path), err)
+			}
+		} else {
+			if op.UnbreakSymlink {
+				filTmp := f.GetSymlinkFile()
+				if filTmp == nil {
+					if op.Verbose {
+						log.Println("Failed to get symlink's file:", f.path())
+					}
+					return errors.New("failed to get symlink's file")
+				}
+				extractLoc := filepath.Join(path, filepath.Dir(symPath))
+				fil := filTmp.(*File)
+				err := fil.ExtractWithOptions(extractLoc, op)
+				if err != nil {
+					if op.Verbose {
+						log.Println("Error while extracting", fil.path(), "to make sure symlink at", f.path(), "is unbroken")
+					}
+					return errors.Join(errors.New("failed to extract symlink's file: "+extractLoc), err)
+				}
+			}
+			path = filepath.Join(path, f.b.Name)
+			err := os.Symlink(f.SymlinkPath(), path)
+			if err != nil {
+				if op.Verbose {
+					log.Println("Failed to create symlink:", path)
+				}
+				return errors.Join(errors.New("failed to create symlink: "+path), err)
+			}
+		}
+	case inode.Char, inode.EChar, inode.Block, inode.EBlock, inode.Fifo, inode.EFifo:
+		if runtime.GOOS == "windows" {
+			if op.Verbose {
+				log.Println(f.path(), "ignored. A device link and can't be created on Windows.")
+			}
+			return nil
+		}
+		_, err := exec.LookPath("mknod")
+		if err != nil {
+			if op.Verbose {
+				log.Println("mknot command not found, cannot create device link for", f.path())
+			}
+			return errors.Join(errors.New("mknot command not found"), err)
+		}
+		path = filepath.Join(path, f.b.Name)
+		var typ string
+		switch f.b.Inode.Type {
+		case inode.Char, inode.EChar:
+			typ = "c"
+		case inode.Block, inode.EBlock:
+			typ = "b"
+		default: //Fifo IPC
+			if runtime.GOOS == "darwin" {
+				if op.Verbose {
+					log.Println(f.path(), "ignored. A Fifo file and can't be created on Darwin.")
+				}
+				return nil
+			}
+			typ = "p"
+		}
+		cmd := exec.Command("mknod", path, typ)
+		if typ != "p" {
+			maj, min := f.deviceDevices()
+			cmd.Args = append(cmd.Args, strconv.Itoa(int(maj)), strconv.Itoa(int(min)))
+		}
+		if op.Verbose {
+			cmd.Stdout = op.LogOutput
+			cmd.Stderr = op.LogOutput
+		}
+		err = cmd.Run()
+		if err != nil {
+			if op.Verbose {
+				log.Println("Error while running mknod for", path)
+			}
+			return errors.Join(errors.New("error while running mknod for "+path), err)
+		}
+	case inode.Sock, inode.ESock:
+		if op.Verbose {
+			log.Println(f.path(), "ignored since it's a socket file.")
+		}
+		return nil
+	default:
+		return errors.New("Unsupported file type. Inode type: " + strconv.Itoa(int(f.b.Inode.Type)))
+	}
+	if op.Verbose {
+		log.Println(f.path(), "extracted to", path)
+	}
+	if op.IgnorePerm {
+		return nil
+	}
+	uid, err := f.b.Uid(&f.r.Low)
+	if err != nil {
+		if op.Verbose {
+			log.Println("Failed to get uid for", path)
+			log.Println(err)
+		}
+		return nil
+	}
+	gid, err := f.b.Gid(&f.r.Low)
+	if err != nil {
+		if op.Verbose {
+			log.Println("Failed to get gid for", path)
+			log.Println(err)
+		}
+		return nil
+	}
+	os.Chmod(path, f.Mode())
+	os.Chown(path, int(uid), int(gid))
+	return nil
+}

file_info.go

@@ -0,0 +1,95 @@
+package squashfs
+
+import (
+	"io/fs"
+	"time"
+
+	"github.com/CalebQ42/squashfs/low/directory"
+	"github.com/CalebQ42/squashfs/low/inode"
+)
+
+type fileInfo struct {
+	name     string
+	size     int64
+	perm     uint32
+	modTime  uint32
+	fileType uint16
+}
+
+func (r Reader) newFileInfo(e directory.Entry) (fileInfo, error) {
+	i, err := r.Low.InodeFromEntry(e)
+	if err != nil {
+		return fileInfo{}, err
+	}
+	return newFileInfo(e.Name, &i), nil
+}
+
+func newFileInfo(name string, i *inode.Inode) fileInfo {
+	var size int64
+	switch i.Type {
+	case inode.Fil:
+		size = int64(i.Data.(inode.File).Size)
+	case inode.EFil:
+		size = int64(i.Data.(inode.EFile).Size)
+	}
+	return fileInfo{
+		name:     name,
+		size:     size,
+		perm:     uint32(i.Perm),
+		modTime:  i.ModTime,
+		fileType: i.Type,
+	}
+}
+
+func (f fileInfo) Name() string {
+	return f.name
+}
+
+func (f fileInfo) Size() int64 {
+	return f.size
+}
+
+func (f fileInfo) Mode() fs.FileMode {
+	switch f.fileType {
+	case inode.Dir, inode.EDir:
+		return fs.FileMode(f.perm | uint32(fs.ModeDir))
+	case inode.Sym, inode.ESym:
+		return fs.FileMode(f.perm | uint32(fs.ModeSymlink))
+	case inode.Char, inode.EChar, inode.Block, inode.EBlock:
+		return fs.FileMode(f.perm | uint32(fs.ModeDevice))
+	case inode.Fifo, inode.EFifo:
+		return fs.FileMode(f.perm | uint32(fs.ModeNamedPipe))
+	case inode.Sock, inode.ESock:
+		return fs.FileMode(f.perm | uint32(fs.ModeSocket))
+	}
+	return fs.FileMode(f.perm)
+}
+
+func (f fileInfo) ModTime() time.Time {
+	return time.Unix(int64(f.modTime), 0)
+}
+
+func (f fileInfo) IsDir() bool {
+	return f.fileType == inode.Dir || f.fileType == inode.EDir
+}
+
+func (f fileInfo) IsSymlink() bool {
+	return f.fileType == inode.Sym || f.fileType == inode.ESym
+}
+
+func (f fileInfo) IsDevice() bool {
+	return f.fileType == inode.Block || f.fileType == inode.EBlock ||
+		f.fileType == inode.Char || f.fileType == inode.EChar
+}
+
+func (f fileInfo) IsFifo() bool {
+	return f.fileType == inode.Fifo || f.fileType == inode.EFifo
+}
+
+func (f fileInfo) IsSocket() bool {
+	return f.fileType == inode.Sock || f.fileType == inode.ESock
+}
+
+func (f fileInfo) Sys() any {
+	return nil
+}

fs.go

@@ -0,0 +1,269 @@
+package squashfs
+
+import (
+	"io"
+	"io/fs"
+	"path"
+	"path/filepath"
+	"slices"
+	"strings"
+
+	squashfslow "github.com/CalebQ42/squashfs/low"
+	"github.com/CalebQ42/squashfs/low/directory"
+)
+
+// FS is a fs.FS representation of a squashfs directory.
+// Implements fs.GlobFS, fs.ReadDirFS, fs.ReadFileFS, fs.StatFS, and fs.SubFS
+type FS struct {
+	r      *Reader
+	parent *FS
+	d      squashfslow.Directory
+}
+
+// Creates a new *FS from the given squashfs.directory
+func (r *Reader) FSFromDirectory(d squashfslow.Directory, parent *FS) *FS {
+	return &FS{
+		d:      d,
+		r:      r,
+		parent: parent,
+	}
+}
+
+// Glob returns the name of the files at the given pattern.
+// All paths are relative to the FS.
+// Uses filepath.Match to compare names.
+func (f *FS) Glob(pattern string) (out []string, err error) {
+	pattern = filepath.Clean(pattern)
+	if !fs.ValidPath(pattern) {
+		return nil, &fs.PathError{
+			Op:   "glob",
+			Path: pattern,
+			Err:  fs.ErrInvalid,
+		}
+	}
+	split := strings.Split(pattern, "/")
+	for i := range f.d.Entries {
+		if match, _ := path.Match(split[0], f.d.Entries[i].Name); match {
+			if len(split) == 1 {
+				out = append(out, f.d.Entries[i].Name)
+				continue
+			}
+			sub, err := f.Sub(split[0])
+			if err != nil {
+				if pathErr, ok := err.(*fs.PathError); ok {
+					if pathErr.Err == fs.ErrNotExist {
+						continue
+					}
+					pathErr.Op = "glob"
+					pathErr.Path = pattern
+					return nil, pathErr
+				}
+				return nil, &fs.PathError{
+					Op:   "glob",
+					Path: pattern,
+					Err:  err,
+				}
+			}
+			subGlob, err := sub.(fs.GlobFS).Glob(strings.Join(split[1:], "/"))
+			if err != nil {
+				if pathErr, ok := err.(*fs.PathError); ok {
+					if pathErr.Err == fs.ErrNotExist {
+						continue
+					}
+					pathErr.Op = "glob"
+					pathErr.Path = pattern
+					return nil, pathErr
+				}
+				return nil, &fs.PathError{
+					Op:   "glob",
+					Path: pattern,
+					Err:  err,
+				}
+			}
+			for i := range subGlob {
+				subGlob[i] = f.d.Name + "/" + subGlob[i]
+			}
+			out = append(out, subGlob...)
+		}
+	}
+	return
+}
+
+// Opens the file at name. Returns a *File as an fs.File.
+func (f *FS) Open(name string) (fs.File, error) {
+	name = filepath.Clean(name)
+	if !fs.ValidPath(name) {
+		return nil, &fs.PathError{
+			Op:   "open",
+			Path: name,
+			Err:  fs.ErrInvalid,
+		}
+	}
+	if name == "." || name == "" {
+		return f.File(), nil
+	}
+	split := strings.Split(name, "/")
+	if split[0] == ".." {
+		if f.parent == nil { // root directory
+			return nil, &fs.PathError{
+				Op:   "open",
+				Path: name,
+				Err:  fs.ErrNotExist,
+			}
+		} else {
+			return f.parent.Open(strings.Join(split[1:], "/"))
+		}
+	}
+	i, found := slices.BinarySearchFunc(f.d.Entries, split[0], func(e directory.Entry, name string) int {
+		return strings.Compare(e.Name, name)
+	})
+	if !found {
+		return nil, &fs.PathError{
+			Op:   "open",
+			Path: name,
+			Err:  fs.ErrNotExist,
+		}
+	}
+	b, err := f.r.Low.BaseFromEntry(f.d.Entries[i])
+	if err != nil {
+		return nil, err
+	}
+	if len(split) == 1 {
+		return &File{
+			b:      b,
+			r:      f.r,
+			parent: f,
+		}, nil
+	}
+	if !b.IsDir() {
+		return nil, &fs.PathError{
+			Op:   "open",
+			Path: name,
+			Err:  fs.ErrNotExist,
+		}
+	}
+	d, err := b.ToDir(&f.r.Low)
+	if err != nil {
+		return nil, err
+	}
+	return f.r.FSFromDirectory(d, f).Open(strings.Join(split[1:], "/"))
+}
+
+// Returns all DirEntry's for the directory at name.
+// If name is not a directory, returns an error.
+func (f *FS) ReadDir(name string) ([]fs.DirEntry, error) {
+	name = filepath.Clean(name)
+	if !fs.ValidPath(name) {
+		return nil, &fs.PathError{
+			Op:   "readdir",
+			Path: name,
+			Err:  fs.ErrInvalid,
+		}
+	}
+	if name == "." || name == "" {
+		return f.File().ReadDir(-1)
+	}
+	fil, err := f.Open(name)
+	if err != nil {
+		return nil, err
+	}
+	return fil.(*File).ReadDir(-1)
+}
+
+// Returns the contents of the file at name.
+func (f *FS) ReadFile(name string) (out []byte, err error) {
+	name = filepath.Clean(name)
+	if !fs.ValidPath(name) {
+		return nil, &fs.PathError{
+			Op:   "readfile",
+			Path: name,
+			Err:  fs.ErrInvalid,
+		}
+	}
+	if name == "." || name == "" {
+		return nil, fs.ErrInvalid
+	}
+	fil, err := f.Open(name)
+	if err != nil {
+		return nil, err
+	}
+	if !fil.(*File).IsRegular() {
+		return nil, fs.ErrInvalid
+	}
+	return io.ReadAll(fil)
+}
+
+// Returns the fs.FileInfo for the file at name.
+func (f *FS) Stat(name string) (fs.FileInfo, error) {
+	name = filepath.Clean(name)
+	if !fs.ValidPath(name) {
+		return nil, &fs.PathError{
+			Op:   "stat",
+			Path: name,
+			Err:  fs.ErrInvalid,
+		}
+	}
+	if name == "." || name == "" {
+		return f.File().Stat()
+	}
+	fil, err := f.Open(name)
+	if err != nil {
+		return nil, err
+	}
+	return fil.(*File).Stat()
+}
+
+// Returns the FS at dir
+func (f *FS) Sub(dir string) (fs.FS, error) {
+	dir = filepath.Clean(dir)
+	if !fs.ValidPath(dir) {
+		return nil, &fs.PathError{
+			Op:   "dir",
+			Path: dir,
+			Err:  fs.ErrInvalid,
+		}
+	}
+	if dir == "." || dir == "" {
+		return f, nil
+	}
+	fil, err := f.Open(dir)
+	if err != nil {
+		return nil, err
+	}
+	if !fil.(*File).IsDir() {
+		return nil, &fs.PathError{
+			Op:   "dir",
+			Path: dir,
+			Err:  fs.ErrInvalid,
+		}
+	}
+	return fil.(*File).FS()
+}
+
+// Extract the FS to the given folder. If the file is a folder, the folder's contents will be extracted to the folder.
+// Uses default extraction options.
+func (f *FS) Extract(folder string) error {
+	return f.File().Extract(folder)
+}
+
+// Extract the FS to the given folder. If the file is a folder, the folder's contents will be extracted to the folder.
+// Allows setting various extraction options via ExtractionOptions.
+func (f *FS) ExtractWithOptions(folder string, op *ExtractionOptions) error {
+	return f.File().ExtractWithOptions(folder, op)
+}
+
+// Returns the FS as a *File
+func (f *FS) File() *File {
+	return &File{
+		b:      f.d.FileBase,
+		parent: f.parent,
+		r:      f.r,
+	}
+}
+
+func (f *FS) path() string {
+	if f.parent == nil {
+		return f.d.Name
+	}
+	return filepath.Join(f.parent.path(), f.d.Name)
+}

fuse2.go

@@ -1,150 +0,0 @@
-package squashfs
-
-import (
-	"bytes"
-	"context"
-	"errors"
-	"io"
-
-	"github.com/CalebQ42/squashfs/internal/inode"
-	"github.com/seaweedfs/fuse"
-	"github.com/seaweedfs/fuse/fs"
-)
-
-// Mounts the archive to the given mountpoint using fuse2. Non-blocking.
-// If Unmount does not get called, the mount point must be unmounted using umount before the directory can be used again.
-func (r *Reader) MountFuse2(mountpoint string) (err error) {
-	if r.con != nil {
-		return errors.New("squashfs archive already mounted")
-	}
-	r.con2, err = fuse.Mount(mountpoint, fuse.ReadOnly())
-	if err != nil {
-		return
-	}
-	<-r.con2.Ready
-	r.mount2Done = make(chan struct{})
-	go func() {
-		fs.Serve(r.con2, squashFuse2{r: r})
-		close(r.mount2Done)
-	}()
-	return
-}
-
-// Blocks until the mount ends.
-// Fuse2 version.
-func (r *Reader) MountWaitFuse2() {
-	if r.mount2Done != nil {
-		<-r.mount2Done
-	}
-}
-
-// Unmounts the archive.
-// Fuse2 version.
-func (r *Reader) UnmountFuse2() error {
-	if r.con != nil {
-		defer func() { r.con = nil }()
-		return r.con.Close()
-	}
-	return errors.New("squashfs archive is not mounted")
-}
-
-type squashFuse2 struct {
-	r *Reader
-}
-
-func (s squashFuse2) Root() (fs.Node, error) {
-	return fileNode2{File: s.r.FS.File}, nil
-}
-
-type fileNode2 struct {
-	*File
-}
-
-func (f fileNode2) Attr(ctx context.Context, attr *fuse.Attr) error {
-	attr.Blocks = f.r.s.Size / 512
-	if f.r.s.Size%512 > 0 {
-		attr.Blocks++
-	}
-	attr.Gid = f.r.ids[f.i.GidInd]
-	attr.Inode = uint64(f.i.Num)
-	attr.Mode = f.i.Mode()
-	attr.Nlink = f.i.LinkCount()
-	attr.Size = f.i.Size()
-	attr.Uid = f.r.ids[f.i.UidInd]
-	return nil
-}
-
-func (f fileNode2) Id() uint64 {
-	return uint64(f.i.Num)
-}
-
-func (f fileNode2) Readlink(ctx context.Context, req *fuse.ReadlinkRequest) (string, error) {
-	return f.SymlinkPath(), nil
-}
-
-func (f fileNode2) Lookup(ctx context.Context, name string) (fs.Node, error) {
-	asFS, err := f.FS()
-	if err != nil {
-		return nil, fuse.ENOTDIR
-	}
-	ret, err := asFS.OpenFile(name)
-	if err != nil {
-		return nil, fuse.ENOENT
-	}
-	return fileNode2{File: ret}, nil
-}
-
-func (f fileNode2) ReadAll(ctx context.Context) ([]byte, error) {
-	if f.IsRegular() {
-		var buf bytes.Buffer
-		_, err := f.WriteTo(&buf)
-		return buf.Bytes(), err
-	}
-	return nil, ENODATA
-}
-
-func (f fileNode2) Read(ctx context.Context, req *fuse.ReadRequest, resp *fuse.ReadResponse) error {
-	if f.IsRegular() {
-		buf := make([]byte, req.Size)
-		n, err := f.File.ReadAt(buf, req.Offset)
-		if err == io.EOF {
-			resp.Data = buf[:n]
-		}
-		return nil
-	}
-	return ENODATA
-}
-
-func (f fileNode2) ReadDirAll(ctx context.Context) (out []fuse.Dirent, err error) {
-	asFS, err := f.FS()
-	if err != nil {
-		return nil, fuse.ENOTDIR
-	}
-	var t fuse.DirentType
-	for i := range asFS.e {
-		switch asFS.e[i].Type {
-		case inode.Fil:
-			t = fuse.DT_File
-		case inode.Dir:
-			t = fuse.DT_Dir
-		case inode.Block:
-			t = fuse.DT_Block
-		case inode.Sym:
-			t = fuse.DT_Link
-		case inode.Char:
-			t = fuse.DT_Char
-		case inode.Fifo:
-			t = fuse.DT_FIFO
-		case inode.Sock:
-			t = fuse.DT_Socket
-		default:
-			t = fuse.DT_Unknown
-		}
-		out = append(out, fuse.Dirent{
-			Inode: uint64(asFS.e[i].Num),
-			Type:  t,
-			Name:  asFS.e[i].Name,
-		})
-	}
-	return
-}

fuse3.go

@@ -1,148 +0,0 @@
-package squashfs
-
-import (
-	"bytes"
-	"context"
-	"errors"
-	"io"
-
-	"github.com/CalebQ42/fuse"
-	"github.com/CalebQ42/fuse/fs"
-	"github.com/CalebQ42/squashfs/internal/inode"
-)
-
-// Mounts the archive to the given mountpoint using fuse3. Non-blocking.
-// If Unmount does not get called, the mount point must be unmounted using umount before the directory can be used again.
-func (r *Reader) Mount(mountpoint string) (err error) {
-	if r.con != nil {
-		return errors.New("squashfs archive already mounted")
-	}
-	r.con, err = fuse.Mount(mountpoint, fuse.ReadOnly())
-	if err != nil {
-		return
-	}
-	<-r.con.Ready
-	r.mountDone = make(chan struct{})
-	go func() {
-		fs.Serve(r.con, squashFuse{r: r})
-		close(r.mountDone)
-	}()
-	return
-}
-
-// Blocks until the mount ends.
-func (r *Reader) MountWait() {
-	if r.mountDone != nil {
-		<-r.mountDone
-	}
-}
-
-// Unmounts the archive.
-func (r *Reader) Unmount() error {
-	if r.con != nil {
-		defer func() { r.con = nil }()
-		return r.con.Close()
-	}
-	return errors.New("squashfs archive is not mounted")
-}
-
-type squashFuse struct {
-	r *Reader
-}
-
-func (s squashFuse) Root() (fs.Node, error) {
-	return fileNode{File: s.r.FS.File}, nil
-}
-
-type fileNode struct {
-	*File
-}
-
-func (f fileNode) Attr(ctx context.Context, attr *fuse.Attr) error {
-	attr.Blocks = f.r.s.Size / 512
-	if f.r.s.Size%512 > 0 {
-		attr.Blocks++
-	}
-	attr.Gid = f.r.ids[f.i.GidInd]
-	attr.Inode = uint64(f.i.Num)
-	attr.Mode = f.i.Mode()
-	attr.Nlink = f.i.LinkCount()
-	attr.Size = f.i.Size()
-	attr.Uid = f.r.ids[f.i.UidInd]
-	return nil
-}
-
-func (f fileNode) Id() uint64 {
-	return uint64(f.i.Num)
-}
-
-func (f fileNode) Readlink(ctx context.Context, req *fuse.ReadlinkRequest) (string, error) {
-	return f.SymlinkPath(), nil
-}
-
-func (f fileNode) Lookup(ctx context.Context, name string) (fs.Node, error) {
-	asFS, err := f.FS()
-	if err != nil {
-		return nil, fuse.ENOTDIR
-	}
-	ret, err := asFS.OpenFile(name)
-	if err != nil {
-		return nil, fuse.ENOENT
-	}
-	return fileNode{File: ret}, nil
-}
-
-func (f fileNode) ReadAll(ctx context.Context) ([]byte, error) {
-	if f.IsRegular() {
-		var buf bytes.Buffer
-		_, err := f.WriteTo(&buf)
-		return buf.Bytes(), err
-	}
-	return nil, ENODATA
-}
-
-func (f fileNode) Read(ctx context.Context, req *fuse.ReadRequest, resp *fuse.ReadResponse) error {
-	if f.IsRegular() {
-		buf := make([]byte, req.Size)
-		n, err := f.File.ReadAt(buf, req.Offset)
-		if err == io.EOF {
-			resp.Data = buf[:n]
-		}
-		return nil
-	}
-	return ENODATA
-}
-
-func (f fileNode) ReadDirAll(ctx context.Context) (out []fuse.Dirent, err error) {
-	asFS, err := f.FS()
-	if err != nil {
-		return nil, fuse.ENOTDIR
-	}
-	var t fuse.DirentType
-	for i := range asFS.e {
-		switch asFS.e[i].Type {
-		case inode.Fil:
-			t = fuse.DT_File
-		case inode.Dir:
-			t = fuse.DT_Dir
-		case inode.Block:
-			t = fuse.DT_Block
-		case inode.Sym:
-			t = fuse.DT_Link
-		case inode.Char:
-			t = fuse.DT_Char
-		case inode.Fifo:
-			t = fuse.DT_FIFO
-		case inode.Sock:
-			t = fuse.DT_Socket
-		default:
-			t = fuse.DT_Unknown
-		}
-		out = append(out, fuse.Dirent{
-			Inode: uint64(asFS.e[i].Num),
-			Type:  t,
-			Name:  asFS.e[i].Name,
-		})
-	}
-	return
-}

fuse_darwin.go

@@ -1,7 +0,0 @@
-package squashfs
-
-import (
-	"golang.org/x/sys/unix"
-)
-
-var ENODATA = unix.Errno(unix.ENODATA)

fuse_linux.go

@@ -1,5 +0,0 @@
-package squashfs
-
-import "github.com/CalebQ42/fuse"
-
-var ENODATA = fuse.ENODATA

fuse_windows.go

@@ -1,3 +0,0 @@
-package squashfs
-
-var ENODATA = windows.Errno(windows.ENODATA)

go.mod

@@ -1,14 +1,11 @@
 module github.com/CalebQ42/squashfs
 
-go 1.20
+go 1.24.0
 
 require (
-	github.com/CalebQ42/fuse v0.1.0
-	github.com/klauspost/compress v1.16.4
-	github.com/pierrec/lz4/v4 v4.1.17
+	github.com/klauspost/compress v1.18.0
+	github.com/pierrec/lz4/v4 v4.1.22
 	github.com/rasky/go-lzo v0.0.0-20200203143853-96a758eda86e
-	github.com/seaweedfs/fuse v1.2.2
 	github.com/therootcompany/xz v1.0.1
-	github.com/ulikunitz/xz v0.5.11
-	golang.org/x/sys v0.7.0
+	github.com/ulikunitz/xz v0.5.12
 )

go.sum

@@ -1,20 +1,14 @@
-github.com/CalebQ42/fuse v0.1.0 h1:KLCNjun7zcd2kBNVFfH+SWJyhuwJdE0nhw5/q8K8HGQ=
-github.com/CalebQ42/fuse v0.1.0/go.mod h1:pJpoKG03HJKVhsp8o0YQYqmfbFsr3Eowt90yQGQVO+4=
-github.com/klauspost/compress v1.16.3 h1:XuJt9zzcnaz6a16/OU53ZjWp/v7/42WcR5t2a0PcNQY=
-github.com/klauspost/compress v1.16.3/go.mod h1:ntbaceVETuRiXiv4DpjP66DpAtAGkEQskQzEyD//IeE=
-github.com/klauspost/compress v1.16.4 h1:91KN02FnsOYhuunwU4ssRe8lc2JosWmizWa91B5v1PU=
-github.com/klauspost/compress v1.16.4/go.mod h1:ntbaceVETuRiXiv4DpjP66DpAtAGkEQskQzEyD//IeE=
-github.com/pierrec/lz4/v4 v4.1.17 h1:kV4Ip+/hUBC+8T6+2EgburRtkE9ef4nbY3f4dFhGjMc=
-github.com/pierrec/lz4/v4 v4.1.17/go.mod h1:gZWDp/Ze/IJXGXf23ltt2EXimqmTUXEy0GFuRQyBid4=
+github.com/klauspost/compress v1.17.9 h1:6KIumPrER1LHsvBVuDa0r5xaG0Es51mhhB9BQB2qeMA=
+github.com/klauspost/compress v1.17.9/go.mod h1:Di0epgTjJY877eYKx5yC51cX2A2Vl2ibi7bDH9ttBbw=
+github.com/klauspost/compress v1.18.0 h1:c/Cqfb0r+Yi+JtIEq73FWXVkRonBlf0CRNYc8Zttxdo=
+github.com/klauspost/compress v1.18.0/go.mod h1:2Pp+KzxcywXVXMr50+X0Q/Lsb43OQHYWRCY2AiWywWQ=
+github.com/pierrec/lz4/v4 v4.1.21 h1:yOVMLb6qSIDP67pl/5F7RepeKYu/VmTyEXvuMI5d9mQ=
+github.com/pierrec/lz4/v4 v4.1.21/go.mod h1:gZWDp/Ze/IJXGXf23ltt2EXimqmTUXEy0GFuRQyBid4=
+github.com/pierrec/lz4/v4 v4.1.22 h1:cKFw6uJDK+/gfw5BcDL0JL5aBsAFdsIT18eRtLj7VIU=
+github.com/pierrec/lz4/v4 v4.1.22/go.mod h1:gZWDp/Ze/IJXGXf23ltt2EXimqmTUXEy0GFuRQyBid4=
 github.com/rasky/go-lzo v0.0.0-20200203143853-96a758eda86e h1:dCWirM5F3wMY+cmRda/B1BiPsFtmzXqV9b0hLWtVBMs=
 github.com/rasky/go-lzo v0.0.0-20200203143853-96a758eda86e/go.mod h1:9leZcVcItj6m9/CfHY5Em/iBrCz7js8LcRQGTKEEv2M=
-github.com/seaweedfs/fuse v1.2.2 h1:01l8OjIdyATRNqVc/gDPgFobuC8ubQF3hRKOPColROw=
-github.com/seaweedfs/fuse v1.2.2/go.mod h1:iwbDQv5BZACY54r6AO/6xsLNuMaYcBKSkLTZVfmK594=
 github.com/therootcompany/xz v1.0.1 h1:CmOtsn1CbtmyYiusbfmhmkpAAETj0wBIH6kCYaX+xzw=
 github.com/therootcompany/xz v1.0.1/go.mod h1:3K3UH1yCKgBneZYhuQUvJ9HPD19UEXEI0BWbMn8qNMY=
-github.com/ulikunitz/xz v0.5.11 h1:kpFauv27b6ynzBNT/Xy+1k+fK4WswhN/6PN5WhFAGw8=
-github.com/ulikunitz/xz v0.5.11/go.mod h1:nbz6k7qbPmH4IRqmfOplQw/tblSgqTqBwxkY0oWt/14=
-golang.org/x/sys v0.6.0 h1:MVltZSvRTcU2ljQOhs94SXPftV6DCNnZViHeQps87pQ=
-golang.org/x/sys v0.6.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.7.0 h1:3jlCCIQZPdOYu1h8BkNvLz8Kgwtae2cagcG/VamtZRU=
-golang.org/x/sys v0.7.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+github.com/ulikunitz/xz v0.5.12 h1:37Nm15o69RwBkXM0J6A5OlE67RZTfzUxTj8fB3dfcsc=
+github.com/ulikunitz/xz v0.5.12/go.mod h1:nbz6k7qbPmH4IRqmfOplQw/tblSgqTqBwxkY0oWt/14=

internal/data/fullreader.go

@@ -1,229 +0,0 @@
-package data
-
-import (
-	"io"
-
-	"github.com/CalebQ42/squashfs/internal/decompress"
-	"github.com/CalebQ42/squashfs/internal/toreader"
-)
-
-type FullReader struct {
-	r         io.ReaderAt
-	d         decompress.Decompressor
-	fragRdr   func() (io.Reader, error)
-	sizes     []uint32
-	blockSize uint32
-	start     uint64
-}
-
-func NewFullReader(r io.ReaderAt, start uint64, d decompress.Decompressor, blockSizes []uint32, blockSize uint32) *FullReader {
-	return &FullReader{
-		r:         r,
-		start:     start,
-		blockSize: blockSize,
-		sizes:     blockSizes,
-		d:         d,
-	}
-}
-
-func (r *FullReader) AddFragment(rdr func() (io.Reader, error)) {
-	r.fragRdr = rdr
-	r.sizes = append(r.sizes, 0)
-}
-
-type outDat struct {
-	err  error
-	data []byte
-	i    int
-}
-
-func (r FullReader) process(index int, offset int64, out chan outDat) {
-	var err error
-	var dat []byte
-	var rdr io.ReadCloser
-	size := realSize(r.sizes[index])
-	if size == 0 {
-		out <- outDat{
-			i:    index,
-			err:  nil,
-			data: make([]byte, r.blockSize),
-		}
-		return
-	}
-	// rdr := io.LimitReader(toreader.NewReader(r.r, offset), int64(size))
-	if size == r.sizes[index] {
-		if dec, ok := r.d.(decompress.Decoder); ok {
-			dat = make([]byte, size)
-			_, err = r.r.ReadAt(dat, offset)
-			if err == nil {
-				dat, err = dec.Decode(dat)
-			}
-		} else {
-			rdr, err = r.d.Reader(io.LimitReader(toreader.NewReader(r.r, offset), int64(size)))
-			if err == nil {
-				dat, err = io.ReadAll(rdr)
-			}
-		}
-	} else {
-		dat = make([]byte, size)
-		_, err = r.r.ReadAt(dat, offset)
-	}
-	out <- outDat{
-		i:    index,
-		err:  err,
-		data: dat,
-	}
-	if clr, ok := rdr.(io.Closer); ok {
-		clr.Close()
-	}
-}
-
-func (r FullReader) ReadAt(p []byte, off int64) (n int, err error) {
-	out := make(chan outDat, len(r.sizes))
-	offset := r.start
-	num := len(r.sizes)
-	start := off / int64(r.blockSize)
-	end := len(p) / int(r.blockSize)
-	if end%int(r.blockSize) > 0 {
-		end++
-	}
-	if end > len(r.sizes) {
-		if r.fragRdr != nil {
-			end = len(r.sizes)
-		} else {
-			end = len(r.sizes) + 1
-		}
-	}
-	for i := 0; i < num; i++ {
-		if i < int(start) || i > end {
-			offset += uint64(realSize(r.sizes[i]))
-			continue
-		}
-		if i == num-1 && r.fragRdr != nil {
-			go func() {
-				rdr, e := r.fragRdr()
-				if err != nil {
-					out <- outDat{
-						i:   num - 1,
-						err: e,
-					}
-					return
-				}
-				dat, e := io.ReadAll(rdr)
-				out <- outDat{
-					i:    num - 1,
-					err:  e,
-					data: dat,
-				}
-				if clr, ok := rdr.(io.Closer); ok {
-					clr.Close()
-				}
-			}()
-			continue
-		}
-		go r.process(i, int64(offset), out)
-		offset += uint64(realSize(r.sizes[i]))
-	}
-	cache := make(map[int]outDat)
-	for cur := start; cur < int64(end); {
-		dat := <-out
-		if dat.err != nil {
-			err = dat.err
-			return
-		}
-		if dat.i != int(cur) {
-			cache[dat.i] = dat
-			continue
-		}
-		if cur == start {
-			dat.data = dat.data[off%int64(r.blockSize):]
-		}
-		for i := range dat.data {
-			p[n+i] = dat.data[i]
-		}
-		n += len(dat.data)
-		cur++
-		var ok bool
-		for {
-			dat, ok = cache[int(cur)]
-			if !ok {
-				break
-			}
-			for i := range dat.data {
-				p[n+i] = dat.data[i]
-			}
-			n += len(dat.data)
-			cur++
-			delete(cache, int(cur))
-		}
-	}
-	if n < len(p) {
-		err = io.EOF
-	}
-	return
-}
-
-func (r FullReader) WriteTo(w io.Writer) (n int64, err error) {
-	out := make(chan outDat, len(r.sizes))
-	offset := r.start
-	num := len(r.sizes)
-	for i := 0; i < num; i++ {
-		if i == num-1 && r.fragRdr != nil {
-			go func() {
-				rdr, e := r.fragRdr()
-				if err != nil {
-					out <- outDat{
-						i:   num - 1,
-						err: e,
-					}
-					return
-				}
-				dat, e := io.ReadAll(rdr)
-				out <- outDat{
-					i:    num - 1,
-					err:  e,
-					data: dat,
-				}
-				if clr, ok := rdr.(io.Closer); ok {
-					clr.Close()
-				}
-			}()
-			continue
-		}
-		go r.process(i, int64(offset), out)
-		offset += uint64(realSize(r.sizes[i]))
-	}
-	cache := make(map[int]outDat)
-	var tmpN int
-	for cur := 0; cur < num; {
-		dat := <-out
-		if dat.err != nil {
-			err = dat.err
-			return
-		}
-		if dat.i != cur {
-			cache[dat.i] = dat
-			continue
-		}
-		tmpN, err = w.Write(dat.data)
-		n += int64(tmpN)
-		if err != nil {
-			return
-		}
-		cur++
-		var ok bool
-		for {
-			dat, ok = cache[cur]
-			if !ok {
-				break
-			}
-			tmpN, err = w.Write(dat.data)
-			n += int64(tmpN)
-			if err != nil {
-				return
-			}
-			cur++
-		}
-	}
-	return
-}

internal/data/reader.go

@@ -1,98 +0,0 @@
-package data
-
-import (
-	"bytes"
-	"io"
-
-	"github.com/CalebQ42/squashfs/internal/decompress"
-)
-
-type Reader struct {
-	master     io.Reader
-	cur        io.Reader
-	fragRdr    io.Reader
-	d          decompress.Decompressor
-	comRdr     io.Reader
-	blockSizes []uint32
-	blockSize  uint32
-	resetable  bool
-}
-
-func NewReader(r io.Reader, d decompress.Decompressor, blockSizes []uint32, blockSize uint32) *Reader {
-	return &Reader{
-		d:          d,
-		master:     r,
-		blockSizes: blockSizes,
-		blockSize:  blockSize,
-		resetable:  true,
-	}
-}
-
-func (r *Reader) AddFragment(rdr io.Reader) {
-	r.fragRdr = rdr
-	r.blockSizes = append(r.blockSizes, 0)
-}
-
-func realSize(siz uint32) uint32 {
-	return siz &^ (1 << 24)
-}
-
-func (r *Reader) advance() (err error) {
-	if clr, ok := r.cur.(io.Closer); ok {
-		clr.Close()
-	}
-	if len(r.blockSizes) == 0 {
-		return io.EOF
-	}
-	if len(r.blockSizes) == 1 && r.fragRdr != nil {
-		r.cur = r.fragRdr
-	} else {
-		size := realSize(r.blockSizes[0])
-		if size == 0 {
-			r.cur = bytes.NewReader(make([]byte, r.blockSize))
-		} else {
-			r.cur = io.LimitReader(r.master, int64(size))
-			if size == r.blockSizes[0] {
-				if rs, ok := r.d.(decompress.Resetable); ok {
-					if r.comRdr == nil {
-						r.cur, err = r.d.Reader(r.cur)
-						if err != nil {
-							return
-						}
-					} else {
-						err = rs.Reset(r.comRdr, r.cur)
-						r.cur = r.comRdr
-					}
-				} else {
-					r.cur, err = r.d.Reader(r.cur)
-				}
-			}
-		}
-	}
-	r.blockSizes = r.blockSizes[1:]
-	return
-}
-
-func (r *Reader) Read(p []byte) (n int, err error) {
-	if r.cur == nil {
-		err = r.advance()
-		if err != nil {
-			return
-		}
-	}
-	n, err = r.cur.Read(p)
-	if err == io.EOF {
-		err = r.advance()
-		if err != nil {
-			return
-		}
-		var tmpN int
-		tmp := make([]byte, len(p)-n)
-		tmpN, err = r.Read(tmp)
-		for i := range tmp {
-			p[n+i] = tmp[i]
-		}
-		n += tmpN
-	}
-	return
-}

internal/decompress/decompress.go

@@ -0,0 +1,5 @@
+package decompress
+
+type Decompressor interface {
+	Decompress([]byte) ([]byte, error)
+}

internal/decompress/gzip.go

@@ -1,17 +0,0 @@
-package decompress
-
-import (
-	"io"
-
-	"github.com/klauspost/compress/zlib"
-)
-
-type GZip struct{}
-
-func (g GZip) Reader(src io.Reader) (io.ReadCloser, error) {
-	return zlib.NewReader(src)
-}
-
-func (g GZip) Reset(old, src io.Reader) error {
-	return old.(zlib.Resetter).Reset(src, nil)
-}

internal/decompress/interface.go

@@ -1,22 +0,0 @@
-package decompress
-
-import (
-	"io"
-)
-
-type Decompressor interface {
-	//Creates a new decompressor reading from src.
-	Reader(src io.Reader) (io.ReadCloser, error)
-}
-
-type Resetable interface {
-	//Reset attempts to re-use an old decompressor with new data.
-	//Will return ErrNotResetable if not Resetable().
-	//Must ALWAYS be provided with a reader created with Reader.
-	Reset(old, src io.Reader) error
-}
-
-type Decoder interface {
-	//Decodes a chunk of data all at once.
-	Decode(in []byte) ([]byte, error)
-}

internal/decompress/lz4.go

@@ -1,6 +1,7 @@
 package decompress
 
 import (
+	"bytes"
 	"io"
 
 	"github.com/pierrec/lz4/v4"
@@ -8,11 +9,7 @@ import (
 
 type Lz4 struct{}
 
-func (l Lz4) Reader(r io.Reader) (io.ReadCloser, error) {
-	return io.NopCloser(lz4.NewReader(r)), nil
-}
-
-func (l Lz4) Reset(old, src io.Reader) error {
-	old.(*lz4.Reader).Reset(src)
-	return nil
+func (l Lz4) Decompress(data []byte) ([]byte, error) {
+	rdr := lz4.NewReader(bytes.NewReader(data))
+	return io.ReadAll(rdr)
 }

internal/decompress/lzma.go

@@ -1,6 +1,7 @@
 package decompress
 
 import (
+	"bytes"
 	"io"
 
 	"github.com/ulikunitz/xz/lzma"
@@ -8,7 +9,10 @@ import (
 
 type Lzma struct{}
 
-func (l Lzma) Reader(r io.Reader) (io.ReadCloser, error) {
-	rdr, err := lzma.NewReader(r)
-	return io.NopCloser(rdr), err
+func (l Lzma) Decompress(data []byte) ([]byte, error) {
+	rdr, err := lzma.NewReader(bytes.NewReader(data))
+	if err != nil {
+		return nil, err
+	}
+	return io.ReadAll(rdr)
 }

internal/decompress/lzo.go

@@ -2,17 +2,12 @@ package decompress
 
 import (
 	"bytes"
-	"io"
 
 	"github.com/rasky/go-lzo"
 )
 
 type Lzo struct{}
 
-func (l Lzo) Reader(r io.Reader) (io.ReadCloser, error) {
-	cache, err := lzo.Decompress1X(r, 0, 0)
-	if err != nil {
-		return nil, err
-	}
-	return io.NopCloser(bytes.NewReader(cache)), nil
+func (l Lzo) Decompress(data []byte) ([]byte, error) {
+	return lzo.Decompress1X(bytes.NewReader(data), len(data), 0)
 }

internal/decompress/xz.go

@@ -1,6 +1,7 @@
 package decompress
 
 import (
+	"bytes"
 	"io"
 
 	"github.com/therootcompany/xz"
@@ -8,11 +9,10 @@ import (
 
 type Xz struct{}
 
-func (x Xz) Reader(r io.Reader) (io.ReadCloser, error) {
-	rdr, err := xz.NewReader(r, 0)
-	return io.NopCloser(rdr), err
-}
-
-func (x Xz) Reset(old, src io.Reader) error {
-	return old.(*xz.Reader).Reset(src)
+func (x Xz) Decompress(data []byte) ([]byte, error) {
+	rdr, err := xz.NewReader(bytes.NewReader(data), 0)
+	if err != nil {
+		return nil, err
+	}
+	return io.ReadAll(rdr)
 }

internal/decompress/zlib.go

@@ -0,0 +1,18 @@
+package decompress
+
+import (
+	"bytes"
+	"compress/zlib"
+	"io"
+)
+
+type Zlib struct{}
+
+func (z Zlib) Decompress(data []byte) ([]byte, error) {
+	rdr, err := zlib.NewReader(bytes.NewReader(data))
+	if err != nil {
+		return nil, err
+	}
+	defer rdr.Close()
+	return io.ReadAll(rdr)
+}

internal/decompress/zstd.go

@@ -1,27 +1,19 @@
 package decompress
 
 import (
+	"bytes"
 	"io"
 
 	"github.com/klauspost/compress/zstd"
 )
 
-type Zstd struct {
-	writeToReader *zstd.Decoder
-}
+type Zstd struct{}
 
-func (z Zstd) Reader(src io.Reader) (io.ReadCloser, error) {
-	r, err := zstd.NewReader(src)
-	return r.IOReadCloser(), err
-}
-
-func (z Zstd) Reset(old, src io.Reader) error {
-	return old.(*zstd.Decoder).Reset(src)
-}
-
-func (z Zstd) Decode(in []byte) ([]byte, error) {
-	if z.writeToReader == nil {
-		z.writeToReader, _ = zstd.NewReader(nil)
+func (z Zstd) Decompress(data []byte) ([]byte, error) {
+	rdr, err := zstd.NewReader(bytes.NewReader(data))
+	if err != nil {
+		return nil, err
 	}
-	return z.writeToReader.DecodeAll(in, nil)
+	defer rdr.Close()
+	return io.ReadAll(rdr)
 }

internal/directory/directory.go

@@ -1,80 +0,0 @@
-package directory
-
-import (
-	"bytes"
-	"encoding/binary"
-	"io"
-)
-
-type header struct {
-	Entries    uint32
-	InodeStart uint32
-	Num        uint32
-}
-
-type entryInit struct {
-	Offset    uint16
-	NumOffset int16
-	Type      uint16
-	NameSize  uint16
-}
-
-type entry struct {
-	entryInit
-	Name []byte
-}
-
-type Entry struct {
-	Name       string
-	BlockStart uint32
-	Type       uint16
-	Offset     uint16
-	Num        uint32
-}
-
-func readEntry(r io.Reader) (e entry, err error) {
-	err = binary.Read(r, binary.LittleEndian, &e.entryInit)
-	if err != nil {
-		return
-	}
-	e.Name = make([]byte, e.NameSize+1)
-	err = binary.Read(r, binary.LittleEndian, &e.Name)
-	return
-}
-
-func ReadEntries(rdr io.Reader, size uint32) (e []Entry, err error) {
-	dat := make([]byte, size-3)
-	rdr.Read(dat)
-	r := bytes.NewReader(dat)
-	var h header
-	var en entry
-	for {
-		err = binary.Read(r, binary.LittleEndian, &h)
-		if err == io.EOF {
-			err = nil
-			return
-		} else if err != nil {
-			return
-		}
-		h.Entries++
-		for i := 0; i < int(h.Entries); i++ {
-			if i != 0 && i%256 == 0 {
-				err = binary.Read(r, binary.LittleEndian, &h)
-				if err != nil {
-					return
-				}
-			}
-			en, err = readEntry(r)
-			if err != nil {
-				return
-			}
-			e = append(e, Entry{
-				Name:       string(en.Name),
-				BlockStart: h.InodeStart,
-				Type:       en.Type,
-				Offset:     en.Offset,
-				Num:        h.Num + uint32(en.NumOffset),
-			})
-		}
-	}
-}

internal/metadata/reader.go

@@ -8,74 +8,57 @@ import (
 )
 
 type Reader struct {
-	master io.Reader
-	cur    io.Reader
-	d      decompress.Decompressor
-	comRdr io.Reader
+	r         io.Reader
+	d         decompress.Decompressor
+	dat       []byte
+	curOffset uint16
 }
 
-func NewReader(master io.Reader, d decompress.Decompressor) *Reader {
+func NewReader(r io.Reader, d decompress.Decompressor) *Reader {
 	return &Reader{
-		master: master,
-		d:      d,
+		r: r,
+		d: d,
 	}
 }
 
-func realSize(siz uint16) uint16 {
-	return siz &^ 0x8000
-}
-
-func (r *Reader) advance() (err error) {
-	if _, ok := r.d.(decompress.Resetable); !ok {
-		if clr, ok := r.cur.(io.Closer); ok {
-			clr.Close()
-		}
-	}
-	var raw uint16
-	err = binary.Read(r.master, binary.LittleEndian, &raw)
+func (r *Reader) advance() error {
+	r.curOffset = 0
+	var size uint16
+	err := binary.Read(r.r, binary.LittleEndian, &size)
 	if err != nil {
-		return
+		return err
 	}
-	size := realSize(raw)
-	r.cur = io.LimitReader(r.master, int64(size))
-	if size == raw {
-		if rs, ok := r.d.(decompress.Resetable); ok {
-			if r.comRdr == nil {
-				r.cur, err = r.d.Reader(r.cur)
-				if err != nil {
-					return
-				}
-			} else {
-				err = rs.Reset(r.comRdr, r.cur)
-				r.cur = r.comRdr
-			}
-		} else {
-			r.cur, err = r.d.Reader(r.cur)
-		}
+	realSize := size &^ 0x8000
+	r.dat = make([]byte, realSize)
+	err = binary.Read(r.r, binary.LittleEndian, &r.dat)
+	if err != nil {
+		return err
 	}
-	return
+	if size != realSize {
+		return nil
+	}
+	r.dat, err = r.d.Decompress(r.dat)
+	return err
 }
 
-func (r *Reader) Read(p []byte) (n int, err error) {
-	if r.cur == nil {
-		err = r.advance()
-		if err != nil {
-			return
+func (r *Reader) Read(b []byte) (int, error) {
+	curRead := 0
+	var toRead int
+	for curRead < len(b) {
+		if r.curOffset >= uint16(len(r.dat)) {
+			if err := r.advance(); err != nil {
+				return curRead, err
+			}
 		}
+		toRead = min(len(b)-curRead, len(r.dat)-int(r.curOffset))
+		copy(b[curRead:], r.dat[r.curOffset:int(r.curOffset)+toRead])
+		r.curOffset += uint16(toRead)
+		curRead += toRead
 	}
-	n, err = r.cur.Read(p)
-	if err == io.EOF {
-		err = r.advance()
-		if err != nil {
-			return
-		}
-		var tmpN int
-		tmp := make([]byte, len(p)-n)
-		tmpN, err = r.Read(tmp)
-		for i := 0; i < tmpN; i++ {
-			p[n+i] = tmp[i]
-		}
-		n += tmpN
-	}
-	return
+	return curRead, nil
+}
+
+func (r *Reader) Close() error {
+	r.dat = nil
+	return nil
 }

internal/routinemanager/manager.go

@@ -0,0 +1,25 @@
+package routinemanager
+
+type Manager struct {
+	channel     chan uint16
+	maxRoutines uint16
+}
+
+func NewManager(maxRoutines uint16) *Manager {
+	m := &Manager{
+		maxRoutines: maxRoutines,
+		channel:     make(chan uint16, maxRoutines),
+	}
+	for i := uint16(0); i < maxRoutines; i++ {
+		m.channel <- i
+	}
+	return m
+}
+
+func (m *Manager) Lock() uint16 {
+	return <-m.channel
+}
+
+func (m *Manager) Unlock(i uint16) {
+	m.channel <- i
+}

internal/toreader/reader.go

@@ -1,25 +0,0 @@
-package toreader
-
-import "io"
-
-type Reader struct {
-	r   io.ReaderAt
-	off int64
-}
-
-func NewReader(r io.ReaderAt, start int64) *Reader {
-	return &Reader{
-		r:   r,
-		off: start,
-	}
-}
-
-func (r *Reader) Read(p []byte) (n int, err error) {
-	n, err = r.r.ReadAt(p, r.off)
-	r.off += int64(n)
-	return
-}
-
-func (r Reader) Offset() int64 {
-	return r.off
-}

internal/toreader/readerat.go

@@ -1,24 +0,0 @@
-package toreader
-
-import "io"
-
-type ReaderAt struct {
-	d []byte
-}
-
-func NewReaderAt(r io.Reader) (ra *ReaderAt, err error) {
-	ra = new(ReaderAt)
-	ra.d, err = io.ReadAll(r)
-	return
-}
-
-func (r ReaderAt) ReadAt(p []byte, off int64) (n int, err error) {
-	if int(off) >= len(r.d) {
-		return 0, io.EOF
-	}
-	n = copy(p, r.d[off:])
-	if n != len(p) {
-		err = io.EOF
-	}
-	return
-}

internal/toreader/toreader.go

@@ -0,0 +1,21 @@
+package toreader
+
+import "io"
+
+type Reader struct {
+	r      io.ReaderAt
+	offset int64
+}
+
+func NewReader(r io.ReaderAt, start int64) *Reader {
+	return &Reader{
+		r:      r,
+		offset: start,
+	}
+}
+
+func (r *Reader) Read(b []byte) (int, error) {
+	n, err := r.r.ReadAt(b, r.offset)
+	r.offset += int64(n)
+	return n, err
+}

low/README.md

@@ -0,0 +1,3 @@
+# Lower-Level Squashfs
+
+This library is a lower level version of the main [squashfs](https://github.com/CalebQ42/squashfs) library that doesn't try to be easy to use and exposes a lot of information that is not necesary for must use cases.

low/data/fullreader.go

@@ -0,0 +1,248 @@
+package data
+
+import (
+	"encoding/binary"
+	"errors"
+	"io"
+	"math"
+	"runtime"
+	"sync"
+
+	"github.com/CalebQ42/squashfs/internal/decompress"
+	"github.com/CalebQ42/squashfs/internal/toreader"
+)
+
+type FragReaderConstructor func() (io.Reader, error)
+
+type FullReader struct {
+	r              io.ReaderAt
+	d              decompress.Decompressor
+	frag           FragReaderConstructor
+	sizes          []uint32
+	initialOffset  int64
+	finalBlockSize uint64
+	blockSize      uint32
+	goroutineLimit uint16
+}
+
+func NewFullReader(r io.ReaderAt, initialOffset int64, d decompress.Decompressor, sizes []uint32, finalBlockSize uint64, blockSize uint32) *FullReader {
+	return &FullReader{
+		r:              r,
+		d:              d,
+		sizes:          sizes,
+		initialOffset:  initialOffset,
+		goroutineLimit: uint16(runtime.NumCPU()),
+		finalBlockSize: finalBlockSize,
+		blockSize:      blockSize,
+	}
+}
+
+func (r *FullReader) AddFrag(frag FragReaderConstructor) {
+	r.frag = frag
+}
+
+func (r *FullReader) SetGoroutineLimit(limit uint16) {
+	if limit <= 0 {
+		r.goroutineLimit = 1
+	}
+	r.goroutineLimit = limit
+}
+
+type retValue struct {
+	err   error
+	data  []byte
+	index uint64
+}
+
+func (r FullReader) process(index uint64, fileOffset uint64, pool *sync.Pool, retChan chan *retValue) {
+	ret := pool.Get().(*retValue)
+	ret.index = index
+	realSize := r.sizes[index] &^ (1 << 24)
+	if realSize == 0 {
+		if index == uint64(len(r.sizes))-1 && r.frag == nil {
+			ret.data = make([]byte, r.finalBlockSize)
+		} else {
+			ret.data = make([]byte, r.blockSize)
+		}
+		ret.err = nil
+		retChan <- ret
+		return
+	}
+	ret.data = make([]byte, realSize)
+	ret.err = binary.Read(toreader.NewReader(r.r, int64(r.initialOffset)+int64(fileOffset)), binary.LittleEndian, &ret.data)
+	if r.sizes[index] == realSize {
+		ret.data, ret.err = r.d.Decompress(ret.data)
+	}
+	retChan <- ret
+}
+
+func (r FullReader) WriteTo(w io.Writer) (int64, error) {
+	// if wa, is := w.(io.WriterAt); is {
+	// 	return r.writeToWriteAt(wa)
+	// }
+	var curIndex uint64
+	var curOffset uint64
+	var toProcess uint16
+	var wrote int64
+	cache := make(map[uint64]*retValue)
+	var errCache []error
+	retChan := make(chan *retValue, r.goroutineLimit)
+	pool := &sync.Pool{
+		New: func() any {
+			return &retValue{}
+		},
+	}
+	for i := uint64(0); i < uint64(math.Ceil(float64(len(r.sizes))/float64(r.goroutineLimit))); i++ {
+		toProcess = min(uint16(len(r.sizes))-(uint16(i)*r.goroutineLimit), r.goroutineLimit)
+		// Start all the goroutines
+		for j := uint16(0); j < toProcess; j++ {
+			go r.process((i*uint64(r.goroutineLimit))+uint64(j), curOffset, pool, retChan)
+			curOffset += uint64(r.sizes[(i*uint64(r.goroutineLimit))+uint64(j)]) &^ (1 << 24)
+		}
+		// Then consume the results on retChan
+		for j := uint16(0); j < toProcess; j++ {
+			res := <-retChan
+			// If there's an error, we don't care about the results.
+			if res.err != nil {
+				errCache = append(errCache, res.err)
+				if len(cache) > 0 {
+					clear(cache)
+				}
+				continue
+			}
+			// If there has been an error previously, we don't care about the results.
+			// We still want to wait for all the goroutines to prevent resources being wasted.
+			if len(errCache) > 0 {
+				continue
+			}
+			// If we don't need the data yet, we cache it and move on
+			if res.index != curIndex {
+				cache[res.index] = res
+				continue
+			}
+			// If we do need the data, we write it
+			wr, err := w.Write(res.data)
+			wrote += int64(wr)
+			if err != nil {
+				errCache = append(errCache, err)
+				if len(cache) > 0 {
+					clear(cache)
+				}
+				continue
+			}
+			pool.Put(res)
+			curIndex++
+			// Now we recursively try to clear the cache
+			for len(cache) > 0 {
+				res, ok := cache[curIndex]
+				if !ok {
+					break
+				}
+				wr, err := w.Write(res.data)
+				wrote += int64(wr)
+				if err != nil {
+					errCache = append(errCache, err)
+					if len(cache) > 0 {
+						clear(cache)
+					}
+					break
+				}
+				delete(cache, curIndex)
+				pool.Put(res)
+				curIndex++
+			}
+		}
+		if len(errCache) > 0 {
+			return wrote, errors.Join(errCache...)
+		}
+	}
+	if r.frag != nil {
+		rdr, err := r.frag()
+		if err != nil {
+			return wrote, err
+		}
+		wr, err := io.Copy(w, rdr)
+		wrote += wr
+		if l, ok := rdr.(*io.LimitedReader); ok {
+			if cl, ok := l.R.(io.Closer); ok {
+				cl.Close()
+			}
+		}
+		if err != nil {
+			return wrote, err
+		}
+	}
+	return wrote, nil
+}
+
+// func (r FullReader) writeToWriteAt(w io.WriterAt) (out int64, outErr error) {
+// 	wait := &sync.WaitGroup{}
+// 	wait.Add(len(r.sizes))
+// 	mgr := routinemanager.NewManager(r.goroutineLimit)
+// 	curOffset := r.initialOffset
+// 	for i := uint64(0); i < uint64(len(r.sizes)); i++ {
+// 		go func(index uint64, fileOffset int64) {
+// 			lckNum := mgr.Lock()
+// 			defer mgr.Unlock(lckNum)
+// 			defer wait.Done()
+// 			realSize := r.sizes[index] &^ (1 << 24)
+// 			if realSize == 0 {
+// 				if index == uint64(len(r.sizes))-1 && r.frag == nil {
+// 					_, err := w.WriteAt([]byte{0}, int64((uint64(r.blockSize)*index)+r.finalBlockSize)-1)
+// 					if err != nil {
+// 						outErr = errors.Join(outErr, err)
+// 						return
+// 					}
+// 					out = max(out, int64((uint64(r.blockSize)*index)+r.finalBlockSize))
+// 				}
+// 				return
+// 			}
+// 			data := make([]byte, realSize)
+// 			err := binary.Read(toreader.NewReader(r.r, int64(fileOffset)), binary.LittleEndian, &data)
+// 			if err != nil {
+// 				outErr = errors.Join(outErr, err)
+// 				return
+// 			}
+// 			if r.sizes[index] == realSize {
+// 				data, err = r.d.Decompress(data)
+// 			}
+// 			if err != nil {
+// 				outErr = errors.Join(outErr, err)
+// 				return
+// 			}
+// 			_, err = w.WriteAt(data, int64(uint64(r.blockSize)*index))
+// 			if err != nil {
+// 				outErr = errors.Join(outErr, err)
+// 				return
+// 			}
+// 			out = max(out, int64(uint64(r.blockSize)*(index+1)))
+// 		}(i, curOffset)
+// 		curOffset += int64(r.sizes[i]) &^ (1 << 24)
+// 	}
+// 	if r.frag != nil {
+// 		wait.Add(1)
+// 		go func() {
+// 			lckNum := mgr.Lock()
+// 			defer mgr.Unlock(lckNum)
+// 			defer wait.Done()
+// 			rdr, err := r.frag()
+// 			if err != nil {
+// 				outErr = errors.Join(outErr, err)
+// 				return
+// 			}
+// 			dat, err := io.ReadAll(rdr)
+// 			if err != nil {
+// 				outErr = errors.Join(outErr, err)
+// 				return
+// 			}
+// 			_, err = w.WriteAt(dat, int64(int(r.blockSize)*len(r.sizes)))
+// 			if err != nil {
+// 				outErr = errors.Join(outErr, err)
+// 				return
+// 			}
+// 			out = int64(int(r.blockSize)*len(r.sizes)) + int64(r.finalBlockSize)
+// 		}()
+// 	}
+// 	wait.Wait()
+// 	return
+// }

low/data/reader.go

@@ -0,0 +1,95 @@
+package data
+
+import (
+	"encoding/binary"
+	"io"
+
+	"github.com/CalebQ42/squashfs/internal/decompress"
+)
+
+type Reader struct {
+	r              io.Reader
+	d              decompress.Decompressor
+	frag           io.Reader
+	sizes          []uint32
+	dat            []byte
+	curOffset      int
+	curIndex       uint64
+	finalBlockSize uint64
+	blockSize      uint32
+}
+
+func NewReader(r io.Reader, d decompress.Decompressor, sizes []uint32, finalBlockSize uint64, blockSize uint32) *Reader {
+	return &Reader{
+		r:              r,
+		d:              d,
+		sizes:          sizes,
+		finalBlockSize: finalBlockSize,
+		blockSize:      blockSize,
+	}
+}
+
+func (r *Reader) AddFrag(fragRdr io.Reader) {
+	r.frag = fragRdr
+}
+
+func (r *Reader) advance() error {
+	r.curOffset = 0
+	defer func() { r.curIndex++ }()
+	var err error
+	if r.curIndex == uint64(len(r.sizes)) && r.frag != nil {
+		r.dat, err = io.ReadAll(r.frag)
+		return err
+	} else if r.curIndex >= uint64(len(r.sizes)) {
+		r.dat = []byte{}
+		return io.EOF
+	}
+	realSize := r.sizes[r.curIndex] &^ (1 << 24)
+	if realSize == 0 {
+		if r.curIndex == uint64(len(r.sizes))-1 && r.frag == nil {
+			r.dat = make([]byte, r.finalBlockSize)
+		} else {
+			r.dat = make([]byte, r.blockSize)
+		}
+		return nil
+	}
+	r.dat = make([]byte, realSize)
+	err = binary.Read(r.r, binary.LittleEndian, &r.dat)
+	if err != nil {
+		return err
+	}
+	if r.sizes[r.curIndex] != realSize {
+		return nil
+	}
+	r.dat, err = r.d.Decompress(r.dat)
+	return err
+}
+
+func (r *Reader) Read(b []byte) (int, error) {
+	curRead := 0
+	var toRead int
+	for curRead < len(b) {
+		if r.curOffset >= len(r.dat) {
+			if err := r.advance(); err != nil {
+				return curRead, err
+			}
+		}
+		toRead = min(len(b)-curRead, len(r.dat)-r.curOffset)
+		toRead = copy(b[curRead:], r.dat[r.curOffset:r.curOffset+toRead])
+		r.curOffset += toRead
+		curRead += toRead
+	}
+	return curRead, nil
+}
+
+func (r *Reader) Close() error {
+	if r.frag != nil {
+		if l, ok := r.frag.(*io.LimitedReader); ok {
+			if cl, ok := l.R.(io.Closer); ok {
+				cl.Close()
+			}
+		}
+	}
+	r.dat = nil
+	return nil
+}

low/directory.go

@@ -0,0 +1,83 @@
+package squashfslow
+
+import (
+	"errors"
+	"io/fs"
+	"path/filepath"
+	"slices"
+	"strings"
+
+	"github.com/CalebQ42/squashfs/internal/metadata"
+	"github.com/CalebQ42/squashfs/internal/toreader"
+	"github.com/CalebQ42/squashfs/low/directory"
+	"github.com/CalebQ42/squashfs/low/inode"
+)
+
+type Directory struct {
+	FileBase
+	Entries []directory.Entry
+}
+
+func (r *Reader) directoryFromRef(ref uint64, name string) (Directory, error) {
+	i, err := r.InodeFromRef(ref)
+	if err != nil {
+		return Directory{}, err
+	}
+	var blockStart uint32
+	var size uint32
+	var offset uint16
+	switch i.Type {
+	case inode.Dir:
+		blockStart = i.Data.(inode.Directory).BlockStart
+		size = uint32(i.Data.(inode.Directory).Size)
+		offset = i.Data.(inode.Directory).Offset
+	case inode.EDir:
+		blockStart = i.Data.(inode.EDirectory).BlockStart
+		size = i.Data.(inode.EDirectory).Size
+		offset = i.Data.(inode.EDirectory).Offset
+	default:
+		return Directory{}, errors.New("not a directory")
+	}
+	dirRdr := metadata.NewReader(toreader.NewReader(r.r, int64(r.Superblock.DirTableStart)+int64(blockStart)), r.d)
+	defer dirRdr.Close()
+	_, err = dirRdr.Read(make([]byte, offset))
+	if err != nil {
+		return Directory{}, err
+	}
+	entries, err := directory.ReadDirectory(dirRdr, size)
+	if err != nil {
+		return Directory{}, err
+	}
+	return Directory{
+		FileBase: r.BaseFromInode(i, name),
+		Entries:  entries,
+	}, nil
+}
+
+func (d *Directory) Open(r *Reader, path string) (FileBase, error) {
+	path = filepath.Clean(path)
+	if path == "." || path == "" {
+		return d.FileBase, nil
+	}
+	split := strings.Split(path, "/")
+	i, found := slices.BinarySearchFunc(d.Entries, split[0], func(e directory.Entry, name string) int {
+		return strings.Compare(e.Name, name)
+	})
+	if !found {
+		return FileBase{}, fs.ErrNotExist
+	}
+	b, err := r.BaseFromEntry(d.Entries[i])
+	if err != nil {
+		return FileBase{}, err
+	}
+	if len(split) == 1 {
+		return b, nil
+	} else if !b.IsDir() {
+		return FileBase{}, fs.ErrNotExist
+	}
+	dir, err := b.ToDir(r)
+	if err != nil {
+		return FileBase{}, err
+	}
+	return dir.Open(r, strings.Join(split[1:], "/"))
+}

low/directory/directory.go

@@ -0,0 +1,62 @@
+package directory
+
+import (
+	"encoding/binary"
+	"io"
+)
+
+type header struct {
+	Count      uint32
+	BlockStart uint32
+	Num        uint32
+}
+
+type decEntry struct {
+	Offset    uint16
+	NumOffset int16
+	InodeType uint16
+	NameSize  uint16
+	// Name []byte (not decoded along with decEntry)
+}
+
+type Entry struct {
+	Name       string
+	BlockStart uint32
+	Offset     uint16
+	InodeType  uint16
+	Num        uint32
+}
+
+func ReadDirectory(r io.Reader, size uint32) (out []Entry, err error) {
+	size -= 3
+	var curRead uint32
+	var h header
+	var de decEntry
+	for curRead < size {
+		err = binary.Read(r, binary.LittleEndian, &h)
+		if err != nil {
+			return
+		}
+		curRead += 12
+		for i := uint32(0); i < h.Count+1 && curRead < size; i++ {
+			err = binary.Read(r, binary.LittleEndian, &de)
+			if err != nil {
+				return
+			}
+			nameTmp := make([]byte, de.NameSize+1)
+			err = binary.Read(r, binary.LittleEndian, &nameTmp)
+			if err != nil {
+				return
+			}
+			curRead += 8 + uint32(de.NameSize) + 1
+			out = append(out, Entry{
+				BlockStart: h.BlockStart,
+				Offset:     de.Offset,
+				Name:       string(nameTmp),
+				InodeType:  de.InodeType,
+				Num:        h.Num + uint32(de.NumOffset),
+			})
+		}
+	}
+	return
+}

low/file_base.go

@@ -0,0 +1,203 @@
+package squashfslow
+
+import (
+	"errors"
+	"io"
+
+	"github.com/CalebQ42/squashfs/internal/metadata"
+	"github.com/CalebQ42/squashfs/internal/toreader"
+	"github.com/CalebQ42/squashfs/low/data"
+	"github.com/CalebQ42/squashfs/low/directory"
+	"github.com/CalebQ42/squashfs/low/inode"
+)
+
+type FileBase struct {
+	Inode inode.Inode
+	Name  string
+}
+
+func (r *Reader) BaseFromInode(i inode.Inode, name string) FileBase {
+	return FileBase{Inode: i, Name: name}
+}
+
+func (r *Reader) BaseFromEntry(e directory.Entry) (FileBase, error) {
+	in, err := r.InodeFromEntry(e)
+	if err != nil {
+		return FileBase{}, err
+	}
+	return FileBase{Inode: in, Name: e.Name}, nil
+}
+
+func (r *Reader) BaseFromRef(ref uint64, name string) (FileBase, error) {
+	in, err := r.InodeFromRef(ref)
+	if err != nil {
+		return FileBase{}, err
+	}
+	return FileBase{Inode: in, Name: name}, nil
+}
+
+func (b *FileBase) Uid(r *Reader) (uint32, error) {
+	return r.Id(b.Inode.UidInd)
+}
+
+func (b *FileBase) Gid(r *Reader) (uint32, error) {
+	return r.Id(b.Inode.GidInd)
+}
+
+func (b *FileBase) IsDir() bool {
+	return b.Inode.Type == inode.Dir || b.Inode.Type == inode.EDir
+}
+
+func (b *FileBase) ToDir(r *Reader) (Directory, error) {
+	var blockStart uint32
+	var size uint32
+	var offset uint16
+	switch b.Inode.Type {
+	case inode.Dir:
+		blockStart = b.Inode.Data.(inode.Directory).BlockStart
+		size = uint32(b.Inode.Data.(inode.Directory).Size)
+		offset = b.Inode.Data.(inode.Directory).Offset
+	case inode.EDir:
+		blockStart = b.Inode.Data.(inode.EDirectory).BlockStart
+		size = b.Inode.Data.(inode.EDirectory).Size
+		offset = b.Inode.Data.(inode.EDirectory).Offset
+	default:
+		return Directory{}, errors.New("not a directory")
+	}
+	dirRdr := metadata.NewReader(toreader.NewReader(r.r, int64(r.Superblock.DirTableStart)+int64(blockStart)), r.d)
+	defer dirRdr.Close()
+	_, err := dirRdr.Read(make([]byte, offset))
+	if err != nil {
+		return Directory{}, err
+	}
+	entries, err := directory.ReadDirectory(dirRdr, size)
+	if err != nil {
+		return Directory{}, err
+	}
+	return Directory{
+		FileBase: *b,
+		Entries:  entries,
+	}, nil
+}
+
+func (b *FileBase) IsRegular() bool {
+	return b.Inode.Type == inode.Fil || b.Inode.Type == inode.EFil
+}
+
+func (b *FileBase) GetRegFileReaders(r *Reader) (*data.Reader, *data.FullReader, error) {
+	if !b.IsRegular() {
+		return nil, nil, errors.New("not a regular file")
+	}
+	var blockStart uint64
+	var fragIndex uint32
+	var fragOffset uint32
+	var fragSize uint64
+	var sizes []uint32
+	if b.Inode.Type == inode.Fil {
+		blockStart = uint64(b.Inode.Data.(inode.File).BlockStart)
+		fragIndex = b.Inode.Data.(inode.File).FragInd
+		fragOffset = b.Inode.Data.(inode.File).FragOffset
+		sizes = b.Inode.Data.(inode.File).BlockSizes
+		fragSize = uint64(b.Inode.Data.(inode.File).Size % r.Superblock.BlockSize)
+	} else {
+		blockStart = b.Inode.Data.(inode.EFile).BlockStart
+		fragIndex = b.Inode.Data.(inode.EFile).FragInd
+		fragOffset = b.Inode.Data.(inode.EFile).FragOffset
+		sizes = b.Inode.Data.(inode.EFile).BlockSizes
+		fragSize = b.Inode.Data.(inode.EFile).Size % uint64(r.Superblock.BlockSize)
+	}
+	frag := func() (io.Reader, error) {
+		ent, err := r.fragEntry(fragIndex)
+		if err != nil {
+			return nil, err
+		}
+		frag := data.NewReader(toreader.NewReader(r.r, int64(ent.Start)), r.d, []uint32{ent.Size}, uint64(r.Superblock.BlockSize), r.Superblock.BlockSize)
+		frag.Read(make([]byte, fragOffset))
+		return io.LimitReader(frag, int64(fragSize)), nil
+	}
+	outRdr := data.NewReader(toreader.NewReader(r.r, int64(blockStart)), r.d, sizes, fragSize, r.Superblock.BlockSize)
+	if fragIndex != 0xffffffff {
+		f, err := frag()
+		if err != nil {
+			return nil, nil, err
+		}
+		outRdr.AddFrag(f)
+	}
+	outFull := data.NewFullReader(r.r, int64(blockStart), r.d, sizes, fragSize, r.Superblock.BlockSize)
+	if fragIndex != 0xffffffff {
+		outFull.AddFrag(frag)
+	}
+	return outRdr, outFull, nil
+}
+
+func (b *FileBase) GetFullReader(r *Reader) (*data.FullReader, error) {
+	if !b.IsRegular() {
+		return nil, errors.New("not a regular file")
+	}
+	var blockStart uint64
+	var fragIndex uint32
+	var fragOffset uint32
+	var fragSize uint64
+	var sizes []uint32
+	if b.Inode.Type == inode.Fil {
+		blockStart = uint64(b.Inode.Data.(inode.File).BlockStart)
+		fragIndex = b.Inode.Data.(inode.File).FragInd
+		fragOffset = b.Inode.Data.(inode.File).FragOffset
+		sizes = b.Inode.Data.(inode.File).BlockSizes
+		fragSize = uint64(b.Inode.Data.(inode.File).Size % r.Superblock.BlockSize)
+	} else {
+		blockStart = b.Inode.Data.(inode.EFile).BlockStart
+		fragIndex = b.Inode.Data.(inode.EFile).FragInd
+		fragOffset = b.Inode.Data.(inode.EFile).FragOffset
+		sizes = b.Inode.Data.(inode.EFile).BlockSizes
+		fragSize = b.Inode.Data.(inode.EFile).Size % uint64(r.Superblock.BlockSize)
+	}
+	outFull := data.NewFullReader(r.r, int64(blockStart), r.d, sizes, fragSize, r.Superblock.BlockSize)
+	if fragIndex != 0xffffffff {
+		outFull.AddFrag(func() (io.Reader, error) {
+			ent, err := r.fragEntry(fragIndex)
+			if err != nil {
+				return nil, err
+			}
+			frag := data.NewReader(toreader.NewReader(r.r, int64(ent.Start)), r.d, []uint32{ent.Size}, uint64(r.Superblock.BlockSize), r.Superblock.BlockSize)
+			frag.Read(make([]byte, fragOffset))
+			return io.LimitReader(frag, int64(fragSize)), nil
+		})
+	}
+	return outFull, nil
+}
+
+func (b *FileBase) GetReader(r *Reader) (*data.Reader, error) {
+	if !b.IsRegular() {
+		return nil, errors.New("not a regular file")
+	}
+	var blockStart uint64
+	var fragIndex uint32
+	var fragOffset uint32
+	var fragSize uint64
+	var sizes []uint32
+	if b.Inode.Type == inode.Fil {
+		blockStart = uint64(b.Inode.Data.(inode.File).BlockStart)
+		fragIndex = b.Inode.Data.(inode.File).FragInd
+		fragOffset = b.Inode.Data.(inode.File).FragOffset
+		sizes = b.Inode.Data.(inode.File).BlockSizes
+		fragSize = uint64(b.Inode.Data.(inode.File).Size % r.Superblock.BlockSize)
+	} else {
+		blockStart = b.Inode.Data.(inode.EFile).BlockStart
+		fragIndex = b.Inode.Data.(inode.EFile).FragInd
+		fragOffset = b.Inode.Data.(inode.EFile).FragOffset
+		sizes = b.Inode.Data.(inode.EFile).BlockSizes
+		fragSize = b.Inode.Data.(inode.EFile).Size % uint64(r.Superblock.BlockSize)
+	}
+	outRdr := data.NewReader(toreader.NewReader(r.r, int64(blockStart)), r.d, sizes, fragSize, r.Superblock.BlockSize)
+	if fragIndex != 0xffffffff {
+		ent, err := r.fragEntry(fragIndex)
+		if err != nil {
+			return nil, err
+		}
+		frag := data.NewReader(toreader.NewReader(r.r, int64(ent.Start)), r.d, []uint32{ent.Size}, uint64(r.Superblock.BlockSize), r.Superblock.BlockSize)
+		frag.Read(make([]byte, fragOffset))
+		outRdr.AddFrag(io.LimitReader(frag, int64(fragSize)))
+	}
+	return outRdr, nil
+}

low/fragment.go

@@ -0,0 +1,7 @@
+package squashfslow
+
+type fragEntry struct {
+	Start uint64
+	Size  uint32
+	_     uint32
+}

low/inode.go

@@ -0,0 +1,26 @@
+package squashfslow
+
+import (
+	"github.com/CalebQ42/squashfs/internal/metadata"
+	"github.com/CalebQ42/squashfs/internal/toreader"
+	"github.com/CalebQ42/squashfs/low/directory"
+	"github.com/CalebQ42/squashfs/low/inode"
+)
+
+func (r *Reader) InodeFromRef(ref uint64) (inode.Inode, error) {
+	offset, meta := (ref>>16)+r.Superblock.InodeTableStart, ref&0xFFFF
+	rdr := metadata.NewReader(toreader.NewReader(r.r, int64(offset)), r.d)
+	defer rdr.Close()
+	_, err := rdr.Read(make([]byte, meta))
+	if err != nil {
+		return inode.Inode{}, err
+	}
+	return inode.Read(rdr, r.Superblock.BlockSize)
+}
+
+func (r *Reader) InodeFromEntry(e directory.Entry) (inode.Inode, error) {
+	rdr := metadata.NewReader(toreader.NewReader(r.r, int64(r.Superblock.InodeTableStart)+int64(e.BlockStart)), r.d)
+	defer rdr.Close()
+	rdr.Read(make([]byte, e.Offset))
+	return inode.Read(rdr, r.Superblock.BlockSize)
+}

low/inode/inode.go

@@ -81,23 +81,17 @@ func Read(r io.Reader, blockSize uint32) (i Inode, err error) {
 
 func (i Inode) Mode() (out fs.FileMode) {
 	out = fs.FileMode(i.Perm)
-	switch i.Data.(type) {
-	case Directory:
+	switch i.Type {
+	case Dir, EDir:
 		out |= fs.ModeDir
-	case EDirectory:
-		out |= fs.ModeDir
-	case Symlink:
+	case Sym, ESym:
 		out |= fs.ModeSymlink
-	case ESymlink:
-		out |= fs.ModeSymlink
-	case Device:
+	case Char, EChar, Block, EBlock:
 		out |= fs.ModeDevice
-	case EDevice:
-		out |= fs.ModeDevice
-	case IPC:
-		out |= fs.ModeNamedPipe
-	case EIPC:
+	case Fifo, EFifo:
 		out |= fs.ModeNamedPipe
+	case Sock, ESock:
+		out |= fs.ModeSocket
 	}
 	return
 }

low/reader.go

@@ -0,0 +1,210 @@
+package squashfslow
+
+import (
+	"encoding/binary"
+	"errors"
+	"io"
+	"math"
+
+	"github.com/CalebQ42/squashfs/internal/decompress"
+	"github.com/CalebQ42/squashfs/internal/metadata"
+	"github.com/CalebQ42/squashfs/internal/toreader"
+	"github.com/CalebQ42/squashfs/low/inode"
+)
+
+// The types of compression supported by squashfs
+const (
+	ZlibCompression = uint16(iota + 1)
+	LZMACompression
+	LZOCompression
+	XZCompression
+	LZ4Compression
+	ZSTDCompression
+)
+
+var (
+	ErrorMagic         = errors.New("magic incorrect. probably not reading squashfs archive or archive is corrupted")
+	ErrorLog           = errors.New("block log is incorrect. possible corrupted archive")
+	ErrorVersion       = errors.New("squashfs version of archive is not 4.0. may be corrupted")
+	ErrorNotExportable = errors.New("archive does not have an export table")
+)
+
+type Reader struct {
+	r           io.ReaderAt
+	d           decompress.Decompressor
+	Root        Directory
+	fragTable   []fragEntry
+	idTable     []uint32
+	exportTable []uint64
+	Superblock  superblock
+}
+
+func NewReader(r io.ReaderAt) (rdr *Reader, err error) {
+	rdr = new(Reader)
+	rdr.r = r
+	err = binary.Read(toreader.NewReader(r, 0), binary.LittleEndian, &rdr.Superblock)
+	if err != nil {
+		return nil, errors.Join(errors.New("failed to read superblock"), err)
+	}
+	if !rdr.Superblock.ValidMagic() {
+		return nil, ErrorMagic
+	}
+	if !rdr.Superblock.ValidBlockLog() {
+		return nil, ErrorLog
+	}
+	if !rdr.Superblock.ValidVersion() {
+		return nil, ErrorVersion
+	}
+	switch rdr.Superblock.CompType {
+	case ZlibCompression:
+		rdr.d = decompress.Zlib{}
+	case LZMACompression:
+		rdr.d = decompress.Lzma{}
+	case LZOCompression:
+		rdr.d = decompress.Lzo{}
+	case XZCompression:
+		rdr.d = decompress.Xz{}
+	case LZ4Compression:
+		rdr.d = decompress.Lz4{}
+	case ZSTDCompression:
+		rdr.d = &decompress.Zstd{}
+	default:
+		return nil, errors.New("invalid compression type. possible corrupted archive")
+	}
+	rdr.Root, err = rdr.directoryFromRef(rdr.Superblock.RootInodeRef, "")
+	if err != nil {
+		return nil, errors.Join(errors.New("failed to read root directory"), err)
+	}
+	return
+}
+
+// Get a uid/gid at the given index. Lazily populates the reader's Id table as necessary.
+func (r *Reader) Id(i uint16) (uint32, error) {
+	if len(r.idTable) > int(i) {
+		return r.idTable[i], nil
+	} else if i >= r.Superblock.IdCount {
+		return 0, errors.New("id out of bounds")
+	}
+	// Populate the id table as needed
+	var blockNum uint32
+	if i != 0 { // If i == 0, we go negatives causing issues with uint32s
+		blockNum = uint32(math.Ceil(float64(i+1)/2048)) - 1
+	} else {
+		blockNum = 0
+	}
+	blocksRead := len(r.idTable) / 2048
+	blocksToRead := int(blockNum) - blocksRead + 1
+
+	var offset uint64
+	var idsToRead uint16
+	var idsTmp []uint32
+	var err error
+	var rdr *metadata.Reader
+	for i := blocksRead; i < int(blocksRead)+blocksToRead; i++ {
+		err = binary.Read(toreader.NewReader(r.r, int64(r.Superblock.IdTableStart)+int64(8*i)), binary.LittleEndian, &offset)
+		if err != nil {
+			return 0, err
+		}
+		idsToRead = min(r.Superblock.IdCount-uint16(len(r.idTable)), 2048)
+		idsTmp = make([]uint32, idsToRead)
+		rdr = metadata.NewReader(toreader.NewReader(r.r, int64(offset)), r.d)
+		err = binary.Read(rdr, binary.LittleEndian, &idsTmp)
+		rdr.Close()
+		if err != nil {
+			return 0, err
+		}
+		r.idTable = append(r.idTable, idsTmp...)
+	}
+	return r.idTable[i], nil
+}
+
+// Get a fragment entry at the given index. Lazily populates the reader's fragment table as necessary.
+func (r *Reader) fragEntry(i uint32) (fragEntry, error) {
+	if len(r.fragTable) > int(i) {
+		return r.fragTable[i], nil
+	} else if i >= r.Superblock.FragCount {
+		return fragEntry{}, errors.New("fragment out of bounds")
+	}
+	// Populate the fragment table as needed
+	var blockNum uint32
+	if i != 0 { // If i == 0, we go negatives causing issues with uint32s
+		blockNum = uint32(math.Ceil(float64(i+1)/512)) - 1
+	} else {
+		blockNum = 0
+	}
+	blocksRead := len(r.fragTable) / 512
+	blocksToRead := int(blockNum) - blocksRead + 1
+
+	var offset uint64
+	var fragsToRead uint32
+	var fragsTmp []fragEntry
+	var err error
+	var rdr *metadata.Reader
+	for i := blocksRead; i < int(blocksRead)+blocksToRead; i++ {
+		err = binary.Read(toreader.NewReader(r.r, int64(r.Superblock.FragTableStart)+int64(8*i)), binary.LittleEndian, &offset)
+		if err != nil {
+			return fragEntry{}, err
+		}
+		fragsToRead = min(r.Superblock.FragCount-uint32(len(r.fragTable)), 512)
+		fragsTmp = make([]fragEntry, fragsToRead)
+		rdr = metadata.NewReader(toreader.NewReader(r.r, int64(offset)), r.d)
+		err = binary.Read(rdr, binary.LittleEndian, &fragsTmp)
+		rdr.Close()
+		if err != nil {
+			return fragEntry{}, err
+		}
+		r.fragTable = append(r.fragTable, fragsTmp...)
+	}
+	return r.fragTable[i], nil
+}
+
+// Get an inode reference at the given index. Lazily populates the reader's export table as necessary.
+func (r *Reader) inodeRef(i uint32) (uint64, error) {
+	if !r.Superblock.Exportable() {
+		return 0, ErrorNotExportable
+	}
+	if len(r.exportTable) > int(i) {
+		return r.exportTable[i], nil
+	} else if i >= r.Superblock.InodeCount {
+		return 0, errors.New("inode out of bounds")
+	}
+	// Populate the export table as needed
+	var blockNum uint32
+	if i != 0 { // If i == 0, we go negatives causing issues with uint32s
+		blockNum = uint32(math.Ceil(float64(i+1)/1024)) - 1
+	} else {
+		blockNum = 0
+	}
+	blocksRead := len(r.exportTable) / 1024
+	blocksToRead := int(blockNum) - blocksRead + 1
+
+	var offset uint64
+	var refsToRead uint32
+	var refsTmp []uint64
+	var err error
+	var rdr *metadata.Reader
+	for i := blocksRead; i < int(blocksRead)+blocksToRead; i++ {
+		err = binary.Read(toreader.NewReader(r.r, int64(r.Superblock.ExportTableStart)+int64(8*i)), binary.LittleEndian, &offset)
+		if err != nil {
+			return 0, err
+		}
+		refsToRead = min(r.Superblock.InodeCount-uint32(len(r.exportTable)), 1024)
+		refsTmp = make([]uint64, refsToRead)
+		rdr = metadata.NewReader(toreader.NewReader(r.r, int64(offset)), r.d)
+		err = binary.Read(rdr, binary.LittleEndian, &refsTmp)
+		rdr.Close()
+		if err != nil {
+			return 0, err
+		}
+		r.exportTable = append(r.exportTable, refsTmp...)
+	}
+	return r.exportTable[i], nil
+}
+
+func (r *Reader) Inode(i uint32) (inode.Inode, error) {
+	ref, err := r.inodeRef(i)
+	if err != nil {
+		return inode.Inode{}, err
+	}
+	return r.InodeFromRef(ref)
+}

low/reader_test.go

@@ -0,0 +1,146 @@
+package squashfslow
+
+import (
+	"fmt"
+	"io"
+	"net/http"
+	"os"
+	"os/exec"
+	"path/filepath"
+	"testing"
+)
+
+const (
+	squashfsURL  = "https://darkstorm.tech/files/LinuxPATest.sfs"
+	squashfsName = "airootfs.sfs"
+)
+
+func preTest(dir string) (fil *os.File, err error) {
+	fil, err = os.Open(filepath.Join(dir, squashfsName))
+	if err != nil {
+		_, err = os.Open(dir)
+		if os.IsNotExist(err) {
+			err = os.Mkdir(dir, 0755)
+		}
+		if err != nil {
+			return
+		}
+		os.Remove(filepath.Join(dir, squashfsName))
+		fil, err = os.Create(filepath.Join(dir, squashfsName))
+		if err != nil {
+			return
+		}
+		var resp *http.Response
+		resp, err = http.DefaultClient.Get(squashfsURL)
+		if err != nil {
+			return
+		}
+		_, err = io.Copy(fil, resp.Body)
+		if err != nil {
+			return
+		}
+	}
+	_, err = exec.LookPath("unsquashfs")
+	if err != nil {
+		return
+	}
+	_, err = exec.LookPath("mksquashfs")
+	return
+}
+
+func TestMisc(t *testing.T) {
+	tmpDir := "../testing"
+	fil, err := preTest(tmpDir)
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer fil.Close()
+	rdr, err := NewReader(fil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	t.Log(rdr.Superblock.FragCount)
+	t.Fatal(rdr.fragEntry(1233))
+}
+
+func TestReader(t *testing.T) {
+	tmpDir := "../testing"
+	fil, err := preTest(tmpDir)
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer fil.Close()
+	rdr, err := NewReader(fil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	path := filepath.Join(tmpDir, "extractTest")
+	os.RemoveAll(path)
+	os.MkdirAll(path, 0777)
+	err = extractToDir(rdr, &rdr.Root.FileBase, path)
+	t.Fatal(err)
+}
+
+var singleFile = "PortableApps/CPU-X/CPU-X-v4.2.0-x86_64.AppImage"
+
+func TestSingleFile(t *testing.T) {
+	tmpDir := "../testing"
+	fil, err := preTest(tmpDir)
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer fil.Close()
+	rdr, err := NewReader(fil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	path := filepath.Join(tmpDir, "extractTest")
+	os.RemoveAll(path)
+	os.MkdirAll(path, 0777)
+	b, err := rdr.Root.Open(rdr, singleFile)
+	if err != nil {
+		t.Fatal(err)
+	}
+	err = extractToDir(rdr, &b, path)
+	t.Fatal(err)
+}
+
+func extractToDir(rdr *Reader, b *FileBase, folder string) error {
+	path := filepath.Join(folder, b.Name)
+	if b.IsDir() {
+		d, err := b.ToDir(rdr)
+		if err != nil {
+			return err
+		}
+		err = os.MkdirAll(path, 0777)
+		if err != nil {
+			return err
+		}
+		var nestBast FileBase
+		for _, e := range d.Entries {
+			nestBast, err = rdr.BaseFromEntry(e)
+			if err != nil {
+				return err
+			}
+			err = extractToDir(rdr, &nestBast, path)
+			if err != nil {
+				return err
+			}
+		}
+	} else if b.IsRegular() {
+		_, full, err := b.GetRegFileReaders(rdr)
+		if err != nil {
+			return err
+		}
+		fil, err := os.Create(path)
+		if err != nil {
+			return err
+		}
+		_, err = full.WriteTo(fil)
+		if err != nil {
+			return err
+		}
+		fmt.Println("Successfully extracted file:", b.Name)
+	}
+	return nil
+}

low/superblock.go

@@ -1,4 +1,4 @@
-package squashfs
+package squashfslow
 
 import "math"
 
@@ -24,57 +24,57 @@ type superblock struct {
 	ExportTableStart uint64
 }
 
-func (s superblock) checkMagic() bool {
+func (s superblock) ValidMagic() bool {
 	return s.Magic == 0x73717368
 }
 
-func (s superblock) checkBlockLog() bool {
+func (s superblock) ValidBlockLog() bool {
 	return s.BlockLog == uint16(math.Log2(float64(s.BlockSize)))
 }
 
-func (s superblock) checkVersion() bool {
+func (s superblock) ValidVersion() bool {
 	return s.VerMaj == 4 && s.VerMin == 0
 }
 
-func (s superblock) uncompressedInodes() bool {
+func (s superblock) UncompressedInodes() bool {
 	return s.Flags&0x1 == 0x1
 }
 
-func (s superblock) uncompressedData() bool {
+func (s superblock) UncompressedData() bool {
 	return s.Flags&0x2 == 0x2
 }
-func (s superblock) uncompressedFragments() bool {
+func (s superblock) UncompressedFragments() bool {
 	return s.Flags&0x8 == 0x8
 }
 
-func (s superblock) noFragments() bool {
+func (s superblock) NoFragments() bool {
 	return s.Flags&0x10 == 0x10
 }
 
-func (s superblock) alwaysFragment() bool {
+func (s superblock) AlwaysFragment() bool {
 	return s.Flags&0x20 == 0x20
 }
 
-func (s superblock) duplicates() bool {
+func (s superblock) Duplicates() bool {
 	return s.Flags&0x40 == 0x40
 }
 
-func (s superblock) exportable() bool {
+func (s superblock) Exportable() bool {
 	return s.Flags&0x80 == 0x80
 }
 
-func (s superblock) uncompressedXattrs() bool {
+func (s superblock) UncompressedXattrs() bool {
 	return s.Flags&0x100 == 0x100
 }
 
-func (s superblock) noXattrs() bool {
+func (s superblock) NoXattrs() bool {
 	return s.Flags&0x200 == 0x200
 }
 
-func (s superblock) compressionOptions() bool {
+func (s superblock) CompressionOptions() bool {
 	return s.Flags&0x400 == 0x400
 }
 
-func (s superblock) uncompressedIDs() bool {
+func (s superblock) UncompressedIDs() bool {
 	return s.Flags&0x800 == 0x800
 }

reader.go

@@ -1,234 +1,37 @@
 package squashfs
 
 import (
-	"encoding/binary"
-	"errors"
 	"io"
-	"math"
 	"time"
 
-	"github.com/CalebQ42/fuse"
-	"github.com/CalebQ42/squashfs/internal/decompress"
-	"github.com/CalebQ42/squashfs/internal/directory"
-	"github.com/CalebQ42/squashfs/internal/inode"
-	"github.com/CalebQ42/squashfs/internal/metadata"
 	"github.com/CalebQ42/squashfs/internal/toreader"
-	fuse2 "github.com/seaweedfs/fuse"
+	squashfslow "github.com/CalebQ42/squashfs/low"
 )
 
 type Reader struct {
 	*FS
-	con         *fuse.Conn
-	con2        *fuse2.Conn
-	mountDone   chan struct{}
-	mount2Done  chan struct{}
-	d           decompress.Decompressor
-	r           io.ReaderAt
-	fragEntries []fragEntry
-	ids         []uint32
-	// exportTable []uint64
-	s superblock
+	Low squashfslow.Reader
 }
 
-var (
-	ErrorMagic   = errors.New("magic incorrect. probably not reading squashfs archive")
-	ErrorLog     = errors.New("block log is incorrect. possible corrupted archive")
-	ErrorVersion = errors.New("squashfs version of archive is not 4.0")
-)
-
-// The types of compression supported by squashfs
-const (
-	GZipCompression = uint16(iota + 1)
-	LZMACompression
-	LZOCompression
-	XZCompression
-	LZ4Compression
-	ZSTDCompression
-)
-
-func NewReaderAtOffset(r io.ReaderAt, off int64) (*Reader, error) {
-	return NewReader(toreader.NewOffsetReader(r, off))
-}
-
-// Creates a new squashfs.Reader from the given io.Reader. NOTE: All data from the io.Reader will be read and stored in memory.
-func NewReaderFromReader(r io.Reader) (*Reader, error) {
-	rdr, err := toreader.NewReaderAt(r)
-	if err != nil {
-		return nil, err
-	}
-	return NewReader(rdr)
-}
-
-// Creates a new squashfs.Reader from the given io.ReaderAt.
 func NewReader(r io.ReaderAt) (*Reader, error) {
-	var squash Reader
-	squash.r = r
-	err := binary.Read(toreader.NewReader(r, 0), binary.LittleEndian, &squash.s)
+	rdr, err := squashfslow.NewReader(r)
 	if err != nil {
 		return nil, err
 	}
-	if !squash.s.checkMagic() {
-		return nil, ErrorMagic
+	out := &Reader{
+		Low: *rdr,
 	}
-	if !squash.s.checkBlockLog() {
-		return nil, ErrorLog
+	out.FS = &FS{
+		d: rdr.Root,
+		r: out,
 	}
-	if !squash.s.checkVersion() {
-		return nil, ErrorVersion
-	}
-	switch squash.s.CompType {
-	case GZipCompression:
-		squash.d = decompress.GZip{}
-	case LZMACompression:
-		squash.d = decompress.Lzma{}
-	case LZOCompression:
-		squash.d = decompress.Lzo{}
-	case XZCompression:
-		squash.d = decompress.Xz{}
-	case LZ4Compression:
-		squash.d = decompress.Lz4{}
-	case ZSTDCompression:
-		squash.d = &decompress.Zstd{}
-	default:
-		return nil, errors.New("uh, I need to do this, OR something if very wrong")
-	}
-	if !squash.s.noFragments() && squash.s.FragCount > 0 {
-		fragOffsets := make([]uint64, int(math.Ceil(float64(squash.s.FragCount)/512)))
-		err = binary.Read(toreader.NewReader(r, int64(squash.s.FragTableStart)), binary.LittleEndian, &fragOffsets)
-		if err != nil {
-			return nil, err
-		}
-		squash.fragEntries = make([]fragEntry, squash.s.FragCount)
-		if len(fragOffsets) == 1 {
-			rdr := metadata.NewReader(toreader.NewReader(r, int64(fragOffsets[0])), squash.d)
-			err = binary.Read(rdr, binary.LittleEndian, &squash.fragEntries)
-			if err != nil {
-				return nil, err
-			}
-		} else {
-			toRead := squash.s.FragCount
-			var curRead uint32
-			var tmp []fragEntry
-			var rdr *metadata.Reader
-			var offset int
-			for i := range fragOffsets {
-				curRead = uint32(math.Min(512, float64(toRead)))
-				tmp = make([]fragEntry, curRead)
-				rdr = metadata.NewReader(toreader.NewReader(r, int64(fragOffsets[i])), squash.d)
-				err = binary.Read(rdr, binary.LittleEndian, &tmp)
-				if err != nil {
-					return nil, err
-				}
-				offset = int(squash.s.FragCount - toRead)
-				for i := range tmp {
-					squash.fragEntries[offset+i] = tmp[i]
-				}
-				toRead -= curRead
-			}
-		}
-	}
-	if squash.s.IdCount > 0 {
-		idOffsets := make([]uint64, int(math.Ceil(float64(squash.s.IdCount)/2048)))
-		err = binary.Read(toreader.NewReader(r, int64(squash.s.IdTableStart)), binary.LittleEndian, &idOffsets)
-		if err != nil {
-			return nil, err
-		}
-		squash.ids = make([]uint32, squash.s.IdCount)
-		if len(idOffsets) == 1 {
-			rdr := metadata.NewReader(toreader.NewReader(r, int64(idOffsets[0])), squash.d)
-			err = binary.Read(rdr, binary.LittleEndian, &squash.ids)
-			if err != nil {
-				return nil, err
-			}
-		} else {
-			toRead := squash.s.IdCount
-			var curRead uint16
-			var tmp []uint32
-			var rdr *metadata.Reader
-			var offset int
-			for i := range idOffsets {
-				curRead = uint16(math.Min(2048, float64(toRead)))
-				tmp = make([]uint32, curRead)
-				rdr = metadata.NewReader(toreader.NewReader(r, int64(idOffsets[i])), squash.d)
-				err = binary.Read(rdr, binary.LittleEndian, &tmp)
-				if err != nil {
-					return nil, err
-				}
-				offset = int(squash.s.IdCount - toRead)
-				for i := range tmp {
-					squash.ids[offset+i] = tmp[i]
-				}
-				toRead -= curRead
-			}
-		}
-	}
-	root, err := squash.inodeFromRef(squash.s.RootInodeRef)
-	if err != nil {
-		return nil, err
-	}
-	rootEnts, err := squash.readDirectory(root)
-	if err != nil {
-		return nil, err
-	}
-	enType := root.Type
-	if enType == inode.EDir {
-		enType = inode.Dir
-	}
-	squash.FS = &FS{
-		e: rootEnts,
-		File: &File{
-			rdr: &squash,
-			i:   root,
-			e: directory.Entry{
-				Name: "",
-				Type: enType,
-			},
-			r: &squash,
-		},
-	}
-	return &squash, nil
+	return out, nil
 }
 
-// func (r *Reader) initExport() (err error) {
-// 	num := int(math.Ceil(float64(r.s.InodeCount) / 1024))
-// 	offsets := make([]uint64, num)
-// 	err = binary.Read(toreader.NewReader(r.r, int64(r.s.ExportTableStart)), binary.LittleEndian, &offsets)
-// 	if err != nil {
-// 		return
-// 	}
-// 	left := r.s.InodeCount
-// 	var toRead uint32
-// 	var new []uint64
-// 	var rdr *metadata.Reader
-// 	for i := range offsets {
-// 		rdr = metadata.NewReader(toreader.NewReader(r.r, int64(offsets[i])), r.d)
-// 		toRead = uint32(math.Min(1024, float64(left)))
-// 		new = make([]uint64, toRead)
-// 		err = binary.Read(rdr, binary.LittleEndian, &new)
-// 		if err != nil {
-// 			return
-// 		}
-// 		left -= toRead
-// 		r.exportTable = append(r.exportTable, new...)
-// 	}
-// 	return nil
-// }
+func NewReaderAtOffset(r io.ReaderAt, offset int64) (*Reader, error) {
+	return NewReader(toreader.NewOffsetReader(r, offset))
+}
 
-// func (r *Reader) inode(index uint32) (i inode.Inode, err error) {
-// 	if r.s.exportable() {
-// 		if r.exportTable == nil {
-// 			err = r.initExport()
-// 			if err != nil {
-// 				return
-// 			}
-// 		}
-// 		return r.inodeFromRef(r.exportTable[index-1])
-// 	}
-// 	err = errors.New("archive is not exportable")
-// 	return
-// }
-
-// Returns the last time the archive was modified.
-func (r Reader) ModTime() time.Time {
-	return time.Unix(int64(r.s.ModTime), 0)
+func (r *Reader) ModTime() time.Time {
+	return time.Unix(int64(r.Low.Superblock.ModTime), 0)
 }

reader_file.go

@@ -1,403 +0,0 @@
-package squashfs
-
-import (
-	"errors"
-	"io"
-	"io/fs"
-	"log"
-	"os"
-	"os/exec"
-	"path/filepath"
-	"strconv"
-	"strings"
-
-	"github.com/CalebQ42/squashfs/internal/data"
-	"github.com/CalebQ42/squashfs/internal/directory"
-	"github.com/CalebQ42/squashfs/internal/inode"
-)
-
-// File represents a file inside a squashfs archive.
-type File struct {
-	i        inode.Inode
-	rdr      io.Reader
-	fullRdr  *data.FullReader
-	r        *Reader
-	parent   *FS
-	e        directory.Entry
-	dirsRead int
-}
-
-var (
-	ErrReadNotFile = errors.New("read called on non-file")
-)
-
-func (r Reader) newFile(en directory.Entry, parent *FS) (*File, error) {
-	i, err := r.inodeFromDir(en)
-	if err != nil {
-		return nil, err
-	}
-	var rdr io.Reader
-	var full *data.FullReader
-	if i.Type == inode.Fil || i.Type == inode.EFil {
-		full, rdr, err = r.getReaders(i)
-		if err != nil {
-			return nil, err
-		}
-	}
-	return &File{
-		e:       en,
-		i:       i,
-		rdr:     rdr,
-		fullRdr: full,
-		r:       &r,
-		parent:  parent,
-	}, nil
-}
-
-// Stat returns the File's fs.FileInfo
-func (f File) Stat() (fs.FileInfo, error) {
-	return newFileInfo(f.e, f.i), nil
-}
-
-// Read reads the data from the file. Only works if file is a normal file.
-func (f File) Read(p []byte) (int, error) {
-	if f.i.Type != inode.Fil && f.i.Type != inode.EFil {
-		return 0, ErrReadNotFile
-	}
-	if f.rdr == nil {
-		return 0, fs.ErrClosed
-	}
-	return f.rdr.Read(p)
-}
-
-func (f File) ReadAt(p []byte, off int64) (int, error) {
-	return f.fullRdr.ReadAt(p, off)
-}
-
-// WriteTo writes all data from the file to the writer. This is multi-threaded.
-// The underlying reader is seperate from the one used with Read and can be reused.
-func (f File) WriteTo(w io.Writer) (int64, error) {
-	return f.fullRdr.WriteTo(w)
-}
-
-// Close simply nils the underlying reader. Here mostly to satisfy fs.File
-func (f *File) Close() error {
-	f.rdr = nil
-	return nil
-}
-
-// ReadDir returns n fs.DirEntry's that's contained in the File (if it's a directory).
-// If n <= 0 all fs.DirEntry's are returned.
-func (f *File) ReadDir(n int) (out []fs.DirEntry, err error) {
-	if !f.IsDir() {
-		return nil, errors.New("File is not a directory")
-	}
-	ents, err := f.r.readDirectory(f.i)
-	if err != nil {
-		return nil, err
-	}
-	start, end := 0, len(ents)
-	if n > 0 {
-		start, end = f.dirsRead, f.dirsRead+n
-		if end > len(f.r.e) {
-			end = len(f.r.e)
-			err = io.EOF
-		}
-	}
-	var fi fileInfo
-	for _, e := range ents[start:end] {
-		fi, err = f.r.newFileInfo(e)
-		if err != nil {
-			f.dirsRead += len(out)
-			return
-		}
-		out = append(out, fs.FileInfoToDirEntry(fi))
-	}
-	f.dirsRead += len(out)
-	return
-}
-
-// FS returns the File as a FS.
-func (f *File) FS() (*FS, error) {
-	if !f.IsDir() {
-		return nil, errors.New("File is not a directory")
-	}
-	ents, err := f.r.readDirectory(f.i)
-	if err != nil {
-		return nil, err
-	}
-	return &FS{
-		File: f,
-		e:    ents,
-	}, nil
-}
-
-// IsDir Yep.
-func (f File) IsDir() bool {
-	return f.i.Type == inode.Dir || f.i.Type == inode.EDir
-}
-
-// IsRegular yep.
-func (f File) IsRegular() bool {
-	return f.i.Type == inode.Fil || f.i.Type == inode.EFil
-}
-
-// IsSymlink yep.
-func (f File) IsSymlink() bool {
-	return f.i.Type == inode.Sym || f.i.Type == inode.ESym
-}
-
-func (f File) isDeviceOrFifo() bool {
-	return f.i.Type == inode.Char || f.i.Type == inode.Block || f.i.Type == inode.EChar || f.i.Type == inode.EBlock || f.i.Type == inode.Fifo || f.i.Type == inode.EFifo
-}
-
-func (f File) deviceDevices() (maj uint32, min uint32) {
-	var dev uint32
-	if f.i.Type == inode.Char || f.i.Type == inode.Block {
-		dev = f.i.Data.(inode.Device).Dev
-	} else if f.i.Type == inode.EChar || f.i.Type == inode.EBlock {
-		dev = f.i.Data.(inode.EDevice).Dev
-	}
-	return dev >> 8, dev & 0x000FF
-}
-
-// SymlinkPath returns the symlink's target path. Is the File isn't a symlink, returns an empty string.
-func (f File) SymlinkPath() string {
-	switch f.i.Type {
-	case inode.Sym:
-		return string(f.i.Data.(inode.Symlink).Target)
-	case inode.ESym:
-		return string(f.i.Data.(inode.ESymlink).Target)
-	}
-	return ""
-}
-
-func (f File) path() string {
-	if f.parent == nil {
-		return f.e.Name
-	}
-	return f.parent.path() + "/" + f.e.Name
-}
-
-// GetSymlinkFile returns the File the symlink is pointing to.
-// If not a symlink, or the target is unobtainable (such as it being outside the archive or it's absolute) returns nil
-func (f File) GetSymlinkFile() *File {
-	if !f.IsSymlink() {
-		return nil
-	}
-	if strings.HasPrefix(f.SymlinkPath(), "/") {
-		return nil
-	}
-	sym, err := f.parent.Open(f.SymlinkPath())
-	if err != nil {
-		return nil
-	}
-	return sym.(*File)
-}
-
-// ExtractionOptions are available options on how to extract.
-type ExtractionOptions struct {
-	LogOutput          io.Writer   //Where error log should write. If nil, uses os.Stdout. Has no effect if verbose is false.
-	DereferenceSymlink bool        //Replace symlinks with the target file
-	UnbreakSymlink     bool        //Try to make sure symlinks remain unbroken when extracted, without changing the symlink
-	Verbose            bool        //Prints extra info to log on an error
-	FolderPerm         fs.FileMode //The permissions used when creating the extraction folder
-}
-
-// DefaultOptions is the default ExtractionOptions.
-func DefaultOptions() ExtractionOptions {
-	return ExtractionOptions{
-		FolderPerm: 0755,
-	}
-}
-
-// ExtractTo extracts the File to the given folder with the default options.
-// If the File is a directory, it instead extracts the directory's contents to the folder.
-func (f File) ExtractTo(folder string) error {
-	return f.ExtractWithOptions(folder, DefaultOptions())
-}
-
-// ExtractSymlink extracts the File to the folder with the DereferenceSymlink option.
-// If the File is a directory, it instead extracts the directory's contents to the folder.
-func (f File) ExtractSymlink(folder string) error {
-	return f.ExtractWithOptions(folder, ExtractionOptions{
-		DereferenceSymlink: true,
-		FolderPerm:         0755,
-	})
-}
-
-// ExtractWithOptions extracts the File to the given folder with the given ExtrationOptions.
-// If the File is a directory, it instead extracts the directory's contents to the folder.
-func (f File) ExtractWithOptions(folder string, op ExtractionOptions) error {
-	if op.Verbose {
-		if op.LogOutput == nil {
-			op.LogOutput = os.Stdout
-		}
-		log.SetOutput(op.LogOutput)
-	}
-	return f.realExtract(folder, op)
-}
-
-func (f File) realExtract(folder string, op ExtractionOptions) error {
-	err := os.MkdirAll(folder, op.FolderPerm)
-	folder = filepath.Clean(folder)
-	if err != nil && !os.IsExist(err) {
-		if op.Verbose {
-			log.Println("Error while creating extraction folder")
-		}
-		return err
-	}
-	switch {
-	case f.IsDir():
-		filFS, _ := f.FS()
-		var ents []directory.Entry
-		ents, err = f.r.readDirectory(f.i)
-		if err != nil {
-			if op.Verbose {
-				log.Println("Error while reading children of", f.path())
-			}
-			return err
-		}
-		errChan := make(chan error)
-		for i := 0; i < len(ents); i++ {
-			go func(ent directory.Entry) {
-				fil, goErr := f.r.newFile(ent, filFS)
-				if goErr != nil {
-					if op.Verbose {
-						log.Println("Error while reading info for", filepath.Join(f.path(), ent.Name))
-					}
-					errChan <- goErr
-					return
-				}
-				if fil.IsDir() {
-					info, _ := fil.Stat()
-					err = os.Mkdir(filepath.Join(folder, fil.e.Name), info.Mode())
-					if err != nil {
-						if op.Verbose {
-							log.Println("Error while creating", filepath.Join(folder, fil.e.Name))
-						}
-						errChan <- err
-						return
-					}
-					errChan <- fil.realExtract(filepath.Join(folder, fil.e.Name), op)
-				} else {
-					errChan <- fil.realExtract(folder, op)
-				}
-				fil.Close()
-			}(ents[i])
-		}
-		for i := 0; i < len(ents); i++ {
-			err = <-errChan
-			if err != nil {
-				return err
-			}
-		}
-	case f.IsRegular():
-		var fil *os.File
-		fil, err = os.Create(folder + "/" + f.e.Name)
-		if os.IsExist(err) {
-			os.Remove(folder + "/" + f.e.Name)
-			fil, err = os.Create(folder + "/" + f.e.Name)
-			if err != nil {
-				if op.Verbose {
-					log.Println("Error while creating", folder+"/"+f.e.Name)
-				}
-				return err
-			}
-		} else if err != nil {
-			if op.Verbose {
-				log.Println("Error while creating", folder+"/"+f.e.Name)
-			}
-			return err
-		}
-		_, err = io.Copy(fil, f)
-		if err != nil {
-			if op.Verbose {
-				log.Println("Error while copying data to", folder+"/"+f.e.Name)
-			}
-			return err
-		}
-	case f.IsSymlink():
-		symPath := f.SymlinkPath()
-		if op.DereferenceSymlink {
-			fil := f.GetSymlinkFile()
-			if fil == nil {
-				if op.Verbose {
-					log.Println("Symlink path(", symPath, ") is unobtainable:", folder+"/"+f.e.Name)
-				}
-				return errors.New("cannot get symlink target")
-			}
-			fil.e.Name = f.e.Name
-			err = fil.realExtract(folder, op)
-			if err != nil {
-				if op.Verbose {
-					log.Println("Error while extracting the symlink's file:", folder+"/"+f.e.Name)
-				}
-				return err
-			}
-			return nil
-		} else if op.UnbreakSymlink {
-			fil := f.GetSymlinkFile()
-			if fil == nil {
-				if op.Verbose {
-					log.Println("Symlink path(", symPath, ") is unobtainable:", folder+"/"+f.e.Name)
-				}
-				return errors.New("cannot get symlink target")
-			}
-			extractLoc := filepath.Clean(folder + "/" + filepath.Dir(symPath))
-			err = fil.realExtract(extractLoc, op)
-			if err != nil {
-				if op.Verbose {
-					log.Println("Error while extracting ", folder+"/"+f.e.Name)
-				}
-				return err
-			}
-		}
-		err = os.Symlink(f.SymlinkPath(), folder+"/"+f.e.Name)
-		if os.IsExist(err) {
-			os.Remove(folder + "/" + f.e.Name)
-			err = os.Symlink(f.SymlinkPath(), folder+"/"+f.e.Name)
-		}
-		if err != nil {
-			if op.Verbose {
-				log.Println("Error while making symlink:", folder+"/"+f.e.Name)
-			}
-			return err
-		}
-	case f.isDeviceOrFifo():
-		_, err = exec.LookPath("mknod")
-		if err != nil {
-			if op.Verbose {
-				log.Println("Extracting Fifo IPC or Device and mknod is not in PATH")
-			}
-			return err
-		}
-		var typ string
-		if f.i.Type == inode.Char || f.i.Type == inode.EChar {
-			typ = "c"
-		} else if f.i.Type == inode.Block || f.i.Type == inode.EBlock {
-			typ = "b"
-		} else { //Fifo IPC
-			typ = "p"
-		}
-		cmd := exec.Command("mknod", folder+"/"+f.e.Name, typ)
-		if typ != "p" {
-			maj, min := f.deviceDevices()
-			cmd.Args = append(cmd.Args, strconv.Itoa(int(maj)), strconv.Itoa(int(min)))
-		}
-		if op.Verbose {
-			cmd.Stdout = op.LogOutput
-			cmd.Stderr = op.LogOutput
-		}
-		err = cmd.Run()
-		if err != nil {
-			if op.Verbose {
-				log.Println("Error while running mknod for", folder+"/"+f.e.Name)
-			}
-			return err
-		}
-	default:
-		return errors.New("Unsupported file type. Inode type: " + strconv.Itoa(int(f.i.Type)))
-	}
-	return nil
-}

reader_fileinfo.go

@@ -1,66 +0,0 @@
-package squashfs
-
-import (
-	"io/fs"
-	"time"
-
-	"github.com/CalebQ42/squashfs/internal/directory"
-	"github.com/CalebQ42/squashfs/internal/inode"
-)
-
-type fileInfo struct {
-	e       directory.Entry
-	size    int64
-	perm    uint32
-	modTime uint32
-}
-
-func (r Reader) newFileInfo(e directory.Entry) (fileInfo, error) {
-	i, err := r.inodeFromDir(e)
-	if err != nil {
-		return fileInfo{}, err
-	}
-	return newFileInfo(e, i), nil
-}
-
-func newFileInfo(e directory.Entry, i inode.Inode) fileInfo {
-	var size int64
-	if i.Type == inode.Fil {
-		size = int64(i.Data.(inode.File).Size)
-	} else if i.Type == inode.EFil {
-		size = int64(i.Data.(inode.EFile).Size)
-	}
-	return fileInfo{
-		e:       e,
-		size:    size,
-		perm:    uint32(i.Perm),
-		modTime: i.ModTime,
-	}
-}
-
-func (f fileInfo) Name() string {
-	return f.e.Name
-}
-
-func (f fileInfo) Size() int64 {
-	return f.size
-}
-
-func (f fileInfo) Mode() fs.FileMode {
-	if f.IsDir() {
-		return fs.FileMode(f.perm | uint32(fs.ModeDir))
-	}
-	return fs.FileMode(f.perm)
-}
-
-func (f fileInfo) ModTime() time.Time {
-	return time.Unix(int64(f.modTime), 0)
-}
-
-func (f fileInfo) IsDir() bool {
-	return f.e.Type == inode.Dir
-}
-
-func (f fileInfo) Sys() any {
-	return nil
-}

reader_frag.go

@@ -1,22 +0,0 @@
-package squashfs
-
-import (
-	"io"
-
-	"github.com/CalebQ42/squashfs/internal/toreader"
-)
-
-type fragEntry struct {
-	Start uint64
-	Size  uint32
-	_     uint32
-}
-
-func (r Reader) fragReader(index uint32) (io.Reader, error) {
-	realSize := r.fragEntries[index].Size &^ (1 << 24)
-	rdr := io.LimitReader(toreader.NewReader(r.r, int64(r.fragEntries[index].Start)), int64(realSize))
-	if realSize != r.fragEntries[index].Size {
-		return rdr, nil
-	}
-	return r.d.Reader(rdr)
-}

reader_fs.go

@@ -1,380 +0,0 @@
-package squashfs
-
-import (
-	"bytes"
-	"io"
-	"io/fs"
-	"path"
-	"path/filepath"
-	"strings"
-
-	"github.com/CalebQ42/squashfs/internal/directory"
-	"github.com/CalebQ42/squashfs/internal/inode"
-)
-
-// FS is a fs.FS representation of a squashfs directory.
-// Implements fs.GlobFS, fs.ReadDirFS, fs.ReadFileFS, fs.StatFS, and fs.SubFS
-type FS struct {
-	*File
-	e []directory.Entry
-}
-
-func (r Reader) newFS(e directory.Entry, parent *FS) (*FS, error) {
-	i, err := r.inodeFromDir(e)
-	if err != nil {
-		return nil, err
-	}
-	ents, err := r.readDirectory(i)
-	if err != nil {
-		return nil, err
-	}
-	return &FS{
-		File: &File{
-			i:      i,
-			r:      &r,
-			parent: parent,
-			e:      e,
-		},
-		e: ents,
-	}, nil
-}
-
-// Opens the file at name. Returns a squashfs.File.
-func (f FS) OpenFile(name string) (*File, error) {
-	name = filepath.Clean(name)
-	if !fs.ValidPath(name) {
-		return nil, &fs.PathError{
-			Op:   "open",
-			Path: name,
-			Err:  fs.ErrInvalid,
-		}
-	}
-	if name == "." || name == "" {
-		return f.File, nil
-	}
-	split := strings.Split(name, "/")
-	for i := range f.e {
-		if f.e[i].Name != split[0] {
-			continue
-		}
-		if len(split) > 1 && f.e[i].Type != inode.Dir {
-			return nil, &fs.PathError{
-				Op:   "open",
-				Path: name,
-				Err:  fs.ErrNotExist,
-			}
-		}
-		if len(split) > 1 {
-			newFS, err := f.r.newFS(f.e[i], &f)
-			if err != nil {
-				return nil, &fs.PathError{
-					Op:   "open",
-					Path: name,
-					Err:  err,
-				}
-			}
-			out, err := newFS.OpenFile(strings.Join(split[1:], "/"))
-			if err != nil {
-				err.(*fs.PathError).Path = name
-			}
-			return out, err
-		}
-		out, err := f.r.newFile(f.e[i], &f)
-		if err != nil {
-			err = &fs.PathError{
-				Op:   "open",
-				Path: name,
-				Err:  err,
-			}
-		}
-		return out, err
-	}
-	return nil, &fs.PathError{
-		Op:   "open",
-		Path: name,
-		Err:  fs.ErrNotExist,
-	}
-}
-
-// Opens the file at name. Returns a io/fs.File.
-func (f FS) Open(name string) (fs.File, error) {
-	return f.OpenFile(name)
-}
-
-// Glob returns the name of the files at the given pattern.
-// All paths are relative to the FS.
-// Uses filepath.Match to compare names.
-func (f FS) Glob(pattern string) (out []string, err error) {
-	pattern = filepath.Clean(pattern)
-	if !fs.ValidPath(pattern) {
-		return nil, &fs.PathError{
-			Op:   "glob",
-			Path: pattern,
-			Err:  fs.ErrInvalid,
-		}
-	}
-	split := strings.Split(pattern, "/")
-	for i := 0; i < len(f.e); i++ {
-		if match, _ := path.Match(split[0], f.e[i].Name); match {
-			if len(split) == 1 {
-				out = append(out, f.e[i].Name)
-				continue
-			}
-			sub, err := f.Sub(split[0])
-			if err != nil {
-				if pathErr, ok := err.(*fs.PathError); ok {
-					if pathErr.Err == fs.ErrNotExist {
-						continue
-					}
-					pathErr.Op = "glob"
-					pathErr.Path = pattern
-					return nil, pathErr
-				}
-				return nil, &fs.PathError{
-					Op:   "glob",
-					Path: pattern,
-					Err:  err,
-				}
-			}
-			subGlob, err := sub.(fs.GlobFS).Glob(strings.Join(split[1:], "/"))
-			if err != nil {
-				if pathErr, ok := err.(*fs.PathError); ok {
-					if pathErr.Err == fs.ErrNotExist {
-						continue
-					}
-					pathErr.Op = "glob"
-					pathErr.Path = pattern
-					return nil, pathErr
-				}
-				return nil, &fs.PathError{
-					Op:   "glob",
-					Path: pattern,
-					Err:  err,
-				}
-			}
-			for i := 0; i < len(subGlob); i++ {
-				subGlob[i] = f.File.e.Name + "/" + subGlob[i]
-			}
-			out = append(out, subGlob...)
-		}
-	}
-	return
-}
-
-// ReadDir returns all the DirEntry returns all DirEntry's for the directory at name.
-// If name is not a directory, returns an error.
-func (f FS) ReadDir(name string) ([]fs.DirEntry, error) {
-	name = filepath.Clean(name)
-	if !fs.ValidPath(name) {
-		return nil, &fs.PathError{
-			Op:   "readdir",
-			Path: name,
-			Err:  fs.ErrInvalid,
-		}
-	}
-	if name == "." || name == "" {
-		return f.File.ReadDir(-1)
-	}
-	split := strings.Split(name, "/")
-	for i := 0; i < len(f.e); i++ {
-		if split[0] == f.e[i].Name {
-			if len(split) == 1 {
-				fi, err := f.r.newFile(f.e[i], &f)
-				if err != nil {
-					return nil, &fs.PathError{
-						Op:   "readdir",
-						Path: name,
-						Err:  err,
-					}
-				}
-				out, err := fi.ReadDir(-1)
-				if err != nil {
-					err = &fs.PathError{
-						Op:   "readdir",
-						Path: name,
-						Err:  err,
-					}
-				}
-				return out, err
-			}
-			sub, err := f.Sub(split[0])
-			if err != nil {
-				if pathErr, ok := err.(*fs.PathError); ok {
-					if pathErr.Err == fs.ErrNotExist {
-						continue
-					}
-					pathErr.Op = "readir"
-					pathErr.Path = name
-					return nil, pathErr
-				}
-				return nil, &fs.PathError{
-					Op:   "readdir",
-					Path: name,
-					Err:  err,
-				}
-			}
-			redDir, err := sub.(fs.ReadDirFS).ReadDir(strings.Join(split[1:], "/"))
-			if err != nil {
-				if pathErr, ok := err.(*fs.PathError); ok {
-					if pathErr.Err == fs.ErrNotExist {
-						continue
-					}
-					pathErr.Op = "readdir"
-					pathErr.Path = name
-					return nil, pathErr
-				}
-				return nil, &fs.PathError{
-					Op:   "readdir",
-					Path: name,
-					Err:  err,
-				}
-			}
-			return redDir, nil
-		}
-	}
-	return nil, &fs.PathError{
-		Op:   "readdir",
-		Path: name,
-		Err:  fs.ErrNotExist,
-	}
-}
-
-// ReadFile returns the data (in []byte) for the file at name.
-func (f FS) ReadFile(name string) ([]byte, error) {
-	fil, err := f.Open(name)
-	if err != nil {
-		if pathErr, ok := err.(*fs.PathError); ok {
-			pathErr.Op = "readfile"
-			pathErr.Path = name
-			return nil, pathErr
-		}
-	}
-	var buf bytes.Buffer
-	_, err = io.Copy(&buf, fil)
-	if err != nil {
-		return nil, &fs.PathError{
-			Op:   "readfile",
-			Path: name,
-			Err:  err,
-		}
-	}
-	return buf.Bytes(), nil
-}
-
-// Stat returns the fs.FileInfo for the file at name.
-func (f FS) Stat(name string) (fs.FileInfo, error) {
-	name = filepath.Clean(strings.TrimPrefix(name, "/"))
-	if !fs.ValidPath(name) {
-		return nil, &fs.PathError{
-			Op:   "stat",
-			Path: name,
-			Err:  fs.ErrInvalid,
-		}
-	}
-	if name == "." || name == "" {
-		return f.File.Stat()
-	}
-	split := strings.Split(name, "/")
-	for i := 0; i < len(f.e); i++ {
-		if split[0] == f.e[i].Name {
-			if len(split) == 1 {
-				in, err := f.r.newFileInfo(f.e[i])
-				if err != nil {
-					err = &fs.PathError{
-						Op:   "stat",
-						Path: name,
-						Err:  err,
-					}
-				}
-				return in, err
-			}
-			sub, err := f.Sub(split[0])
-			if err != nil {
-				if pathErr, ok := err.(*fs.PathError); ok {
-					if pathErr.Err == fs.ErrNotExist {
-						continue
-					}
-					pathErr.Op = "stat"
-					pathErr.Path = name
-					return nil, pathErr
-				}
-				return nil, &fs.PathError{
-					Op:   "stat",
-					Path: name,
-					Err:  err,
-				}
-			}
-			stat, err := sub.(fs.StatFS).Stat(strings.Join(split[1:], "/"))
-			if err != nil {
-				if pathErr, ok := err.(*fs.PathError); ok {
-					if pathErr.Err == fs.ErrNotExist {
-						continue
-					}
-					pathErr.Op = "stat"
-					pathErr.Path = name
-					return nil, pathErr
-				}
-				return nil, &fs.PathError{
-					Op:   "stat",
-					Path: name,
-					Err:  err,
-				}
-			}
-			return stat, nil
-		}
-	}
-	return nil, &fs.PathError{
-		Op:   "stat",
-		Path: name,
-		Err:  fs.ErrNotExist,
-	}
-}
-
-// Sub returns the FS at dir
-func (f FS) Sub(dir string) (fs.FS, error) {
-	dir = filepath.Clean(dir)
-	if !fs.ValidPath(dir) {
-		return nil, &fs.PathError{
-			Op:   "sub",
-			Path: dir,
-			Err:  fs.ErrInvalid,
-		}
-	}
-	if dir == "." || dir == "" {
-		return f, nil
-	}
-	split := strings.Split(dir, "/")
-	for i := range f.e {
-		if f.e[i].Name != split[0] {
-			continue
-		}
-		if f.e[i].Type != inode.Dir {
-			return nil, &fs.PathError{
-				Op:   "sub",
-				Path: dir,
-				Err:  fs.ErrNotExist,
-			}
-		}
-		newFS, err := f.r.newFS(f.e[i], &f)
-		if err != nil {
-			return nil, &fs.PathError{
-				Op:   "sub",
-				Path: dir,
-				Err:  err,
-			}
-		}
-		if len(split) > 1 {
-			ret, err := newFS.Sub(strings.Join(split[1:], "/"))
-			if err != nil {
-				err.(*fs.PathError).Path = dir
-			}
-			return ret, err
-		}
-		return newFS, nil
-	}
-	return nil, &fs.PathError{
-		Op:   "sub",
-		Path: dir,
-		Err:  fs.ErrNotExist,
-	}
-}

reader_inode.go

@@ -1,114 +0,0 @@
-package squashfs
-
-import (
-	"errors"
-	"io"
-
-	"github.com/CalebQ42/squashfs/internal/data"
-	"github.com/CalebQ42/squashfs/internal/directory"
-	"github.com/CalebQ42/squashfs/internal/inode"
-	"github.com/CalebQ42/squashfs/internal/metadata"
-	"github.com/CalebQ42/squashfs/internal/toreader"
-)
-
-func (r Reader) inodeFromRef(ref uint64) (i inode.Inode, err error) {
-	offset, meta := (ref>>16)+r.s.InodeTableStart, ref&0xFFFF
-	rdr := metadata.NewReader(toreader.NewReader(r.r, int64(offset)), r.d)
-	_, err = rdr.Read(make([]byte, meta))
-	if err != nil {
-		return
-	}
-	return inode.Read(rdr, r.s.BlockSize)
-}
-
-func (r Reader) inodeFromDir(e directory.Entry) (i inode.Inode, err error) {
-	rdr := metadata.NewReader(toreader.NewReader(r.r, int64(uint64(e.BlockStart)+r.s.InodeTableStart)), r.d)
-	_, err = rdr.Read(make([]byte, e.Offset))
-	if err != nil {
-		return
-	}
-	return inode.Read(rdr, r.s.BlockSize)
-}
-
-func (r Reader) getReaders(i inode.Inode) (full *data.FullReader, rdr *data.Reader, err error) {
-	var fragOffset uint64
-	var blockOffset uint64
-	var blockSizes []uint32
-	var fragInd uint32
-	var fragSize uint32
-	if i.Type == inode.Fil {
-		fragOffset = uint64(i.Data.(inode.File).FragOffset)
-		blockOffset = uint64(i.Data.(inode.File).BlockStart)
-		blockSizes = i.Data.(inode.File).BlockSizes
-		fragInd = i.Data.(inode.File).FragInd
-		fragSize = i.Data.(inode.File).Size % r.s.BlockSize
-	} else if i.Type == inode.EFil {
-		fragOffset = uint64(i.Data.(inode.EFile).FragOffset)
-		blockOffset = i.Data.(inode.EFile).BlockStart
-		blockSizes = i.Data.(inode.EFile).BlockSizes
-		fragInd = i.Data.(inode.EFile).FragInd
-		fragSize = uint32(i.Data.(inode.EFile).Size % uint64(r.s.BlockSize))
-	} else {
-		return nil, nil, errors.New("getReaders called on non-file type")
-	}
-	rdr = data.NewReader(toreader.NewReader(r.r, int64(blockOffset)), r.d, blockSizes, r.s.BlockSize)
-	full = data.NewFullReader(r.r, uint64(blockOffset), r.d, blockSizes, r.s.BlockSize)
-	if fragInd != 0xFFFFFFFF {
-		full.AddFragment(func() (io.Reader, error) {
-			var fragRdr io.Reader
-			fragRdr, err = r.fragReader(fragInd)
-			if err != nil {
-				return nil, err
-			}
-			var n, tmpN int
-			for n != int(fragOffset) {
-				tmpN, err = fragRdr.Read(make([]byte, int(fragOffset)-n))
-				if err != nil {
-					return nil, err
-				}
-				n += tmpN
-			}
-			fragRdr = io.LimitReader(fragRdr, int64(fragSize))
-			return fragRdr, nil
-		})
-		var fragRdr io.Reader
-		fragRdr, err = r.fragReader(fragInd)
-		if err != nil {
-			return nil, nil, err
-		}
-		var n, tmpN int
-		for n != int(fragOffset) {
-			tmpN, err = fragRdr.Read(make([]byte, int(fragOffset)-n))
-			if err != nil {
-				return nil, nil, err
-			}
-			n += tmpN
-		}
-		fragRdr = io.LimitReader(fragRdr, int64(fragSize))
-		rdr.AddFragment(fragRdr)
-	}
-	return
-}
-
-func (r Reader) readDirectory(i inode.Inode) ([]directory.Entry, error) {
-	var offset uint64
-	var blockOffset uint16
-	var size uint32
-	if i.Type == inode.Dir {
-		offset = uint64(i.Data.(inode.Directory).BlockStart)
-		blockOffset = i.Data.(inode.Directory).Offset
-		size = uint32(i.Data.(inode.Directory).Size)
-	} else if i.Type == inode.EDir {
-		offset = uint64(i.Data.(inode.EDirectory).BlockStart)
-		blockOffset = i.Data.(inode.EDirectory).Offset
-		size = i.Data.(inode.EDirectory).Size
-	} else {
-		return nil, errors.New("readDirectory called on non-directory type")
-	}
-	rdr := metadata.NewReader(toreader.NewReader(r.r, int64(offset+r.s.DirTableStart)), r.d)
-	_, err := rdr.Read(make([]byte, blockOffset))
-	if err != nil {
-		return nil, err
-	}
-	return directory.ReadEntries(rdr, size)
-}

squashfs_test.go

@@ -1,4 +1,4 @@
-package squashfs_test
+package squashfs
 
 //Actually proper tests go here.
 
@@ -13,15 +13,11 @@ import (
 	"strconv"
 	"testing"
 	"time"
-
-	"github.com/CalebQ42/squashfs"
 )
 
 const (
-	squashfsURL  = "https://darkstorm.tech/LinuxPATest.sfs"
+	squashfsURL  = "https://darkstorm.tech/files/LinuxPATest.sfs"
 	squashfsName = "LinuxPATest.sfs"
-
-	filePath = "PortableApps/Notepad++Portable/App/DefaultData/Config/contextMenu.xml"
 )
 
 func preTest(dir string) (fil *os.File, err error) {
@@ -63,13 +59,13 @@ func TestMisc(t *testing.T) {
 	if err != nil {
 		t.Fatal(err)
 	}
-	rdr, err := squashfs.NewReader(fil)
+	rdr, err := NewReader(fil)
 	if err != nil {
 		t.Fatal(err)
 	}
 	_ = rdr
 	// Put testing here
-	t.Fatal("UM")
+	// t.Fatal("UM")
 }
 
 func BenchmarkRace(b *testing.B) {
@@ -83,21 +79,25 @@ func BenchmarkRace(b *testing.B) {
 	os.RemoveAll(libPath)
 	os.RemoveAll(unsquashPath)
 	var libTime, unsquashTime time.Duration
+	op := FastOptions()
+	op.IgnorePerm = true
 	start := time.Now()
-	rdr, err := squashfs.NewReader(fil)
+	rdr, err := NewReader(fil)
 	if err != nil {
 		b.Fatal(err)
 	}
-	err = rdr.ExtractTo(libPath)
+	err = rdr.ExtractWithOptions(libPath, op)
 	if err != nil {
 		b.Fatal(err)
 	}
 	libTime = time.Since(start)
 	cmd := exec.Command("unsquashfs", "-d", unsquashPath, fil.Name())
+	cmd.Stdout = os.Stdout
+	cmd.Stderr = os.Stderr
 	start = time.Now()
 	err = cmd.Run()
 	if err != nil {
-		b.Fatal(err)
+		b.Log("Unsquashfs error:", err)
 	}
 	unsquashTime = time.Since(start)
 	b.Log("Library took:", libTime.Round(time.Millisecond))
@@ -106,10 +106,9 @@ func BenchmarkRace(b *testing.B) {
 }
 
 func TestExtractQuick(t *testing.T) {
-
 	//First, setup everything and extract the archive using the library and unsquashfs
 
-	// tmpDir := b.TempDir()
+	// tmpDir := bTempDir()
 	tmpDir := "testing"
 	fil, err := preTest(tmpDir)
 	if err != nil {
@@ -119,12 +118,16 @@ func TestExtractQuick(t *testing.T) {
 	unsquashPath := filepath.Join(tmpDir, "ExtractSquashfs")
 	os.RemoveAll(libPath)
 	os.RemoveAll(unsquashPath)
-	rdr, err := squashfs.NewReader(fil)
+	rdr, err := NewReader(fil)
 	if err != nil {
 		t.Fatal(err)
 	}
-	op := squashfs.DefaultOptions()
+	os.RemoveAll(filepath.Join(tmpDir, "testLog.txt"))
+	logFil, _ := os.Create(filepath.Join(tmpDir, "testLog.txt"))
+	op := FastOptions()
 	op.Verbose = true
+	op.IgnorePerm = true
+	op.LogOutput = logFil
 	err = rdr.ExtractWithOptions(libPath, op)
 	if err != nil {
 		t.Fatal(err)
@@ -140,17 +143,21 @@ func TestExtractQuick(t *testing.T) {
 	//TODO: Add long test that checks contents.
 
 	squashFils := os.DirFS(unsquashPath)
-	err = fs.WalkDir(squashFils, ".", func(path string, d fs.DirEntry, _ error) error {
+	err = fs.WalkDir(squashFils, ".", func(path string, _ fs.DirEntry, _ error) error {
 		libFil, e := os.Open(filepath.Join(libPath, path))
 		if e != nil {
 			return e
 		}
-		stat, _ := d.Info()
+		sfsFile, e := os.Open(filepath.Join(unsquashPath, path))
+		if e != nil {
+			return e
+		}
+		sfsStat, _ := sfsFile.Stat()
 		libStat, _ := libFil.Stat()
-		if stat.Size() != libStat.Size() {
-			t.Log(path, "not the same size between library and unsquashfs")
+		if sfsStat.Size() != libStat.Size() {
+			t.Log(libFil.Name(), "not the same size between library and unsquashfs")
 			t.Log("File is", libStat.Size())
-			t.Log("Should be", stat.Size())
+			t.Log("Should be", sfsStat.Size())
 			return errors.New("file not the correct size")
 		}
 		return nil
@@ -158,17 +165,18 @@ func TestExtractQuick(t *testing.T) {
 	if err != nil {
 		t.Fatal(err)
 	}
-	t.Fatal("end")
 }
 
+var filePath = "Start.exe"
+
 func TestSingleFile(t *testing.T) {
 	tmpDir := "testing"
 	fil, err := preTest(tmpDir)
 	if err != nil {
 		t.Fatal(err)
 	}
-	os.Remove(filepath.Base(filePath))
-	rdr, err := squashfs.NewReader(fil)
+	os.Remove(filepath.Join(tmpDir, filePath))
+	rdr, err := NewReader(fil)
 	if err != nil {
 		t.Fatal(err)
 	}
@@ -176,31 +184,10 @@ func TestSingleFile(t *testing.T) {
 	if err != nil {
 		t.Fatal(err)
 	}
-	op := squashfs.DefaultOptions()
+	op := DefaultOptions()
 	op.Verbose = true
-	err = f.(*squashfs.File).ExtractWithOptions("testing", op)
+	err = f.(*File).ExtractWithOptions("testing", op)
 	if err != nil {
 		t.Fatal(err)
 	}
-	t.Fatal("HI")
-}
-
-func TestFuse(t *testing.T) {
-	tmpDir := "testing"
-	fil, err := preTest(tmpDir)
-	if err != nil {
-		t.Fatal(err)
-	}
-	os.Remove(filepath.Base(filePath))
-	rdr, err := squashfs.NewReader(fil)
-	if err != nil {
-		t.Fatal(err)
-	}
-	err = rdr.Mount("testing/fuseTest")
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer rdr.Unmount()
-	rdr.MountWait()
-	t.Fatal("testing")
 }